Chevrolet C-10 1966

48000 USD

CAR DESCRIPTION FROM SELLER
This classic truck has undergone a complete frame off restoration. This truck was built with being a daily driver in mind but all the best parts have been purchased for this build. Please read the below. Key features are LS motor, Porterbuilt suspension, Accuair air-ride, Vintage air kit, Dakota digital gauges, Lexani wheels, new wiring harness, push to start go-keyless system, and more. Starting with the body, the truck started life as a long bed, the bed was shortened, raised and boxed The bed features a custom compartment that raises to reveal the accuair system, tank, compressors, and battery it is locked, and has a gas assist shock. All the bumpers were modified to fit snug to the body, they were sectioned and shortened, new trim kit was purchased and wrapped in matte black vinyl. New clear turn signals, new led tail lights and the headlights are from Trucklite. The entire engine bay has custom sheet metal design with dimple die with steel mesh. This is carried to the bed where the tubs also have the same design.Truck has a custom one off grill, with LED lights behind it. The suspension/chassis was completely replaced with a full Porterbuilt kit to lay frame, new upper and lower control arms, dropmember, crossmember, an adjustable wishbone rear end, all of this is controlled via Accuiar, two vair compressors, 4 corner sensors, the shocks are from Airride and have adjustable dampeners. All new steering rack and pinion, new CPP brake kit, cross drilled rotors. Completely rebuilt rear differential with posi was installed. All new lines/wiring on the truck including steel braided fuel lines with anodized fittings, and all new hard lines for the brakes. Relocated the gas tank and replaced with a Custom Boyd fuel cell (installed between the rails below the bed), with custom flush motorcycle gas cap installed in the back fender of the bed for that extra touch. All new trim package installed and wrapped in black vinyl. Heading to the bed, the truck has a MarK bedwood kit, the bed was shortened, Raised, custom hinge that raises on a gas shock to expose the accuair tank, compressors and VU4, all floating on an Accuair exo mount system (no rattling when the compression come on). The bed was sprayed with line-x and custom pop out tie downs were installed along with LED lights. To top this off, there is a custom locked compartment only accessible when the tailgate is down!Moving inside the truck was gutted, whole 5 gallon lizard skin sound proofing/ sealant was laid down, follow by dynamite along the firewall and transmission covering. All wiring redone and new wiring harness installed, Dakota digital gauges, new Ididit steering column, Billet specialities Camber steering wheel, vintage air kit installed for AC/heater, all interior steel painted black, set of two Chevy Tahoe seats, new pedals, new window motors installed, Keyless system for auto start, custom push buttons for all leds, lights, auto start, accessories etc. new glass was installed along with all new weather stripping. The interior has not been finished leaving the buyer a clean slate for seat covers, audio, and interior finishing. MotorA mild Cam was installed from comp cams, kooks headers, Holly intake manifold and holly EFI. All parts have been powedercoated black and site in a completely custom engine bay with one off fenders, dimple died and fabricated by nostalgia hot rods in Las Vegas. Flaws:Paint is not perfect, there is small damage to the back passenger side bed, interior is not finished. please let me know if you have any questions. i am happy to help this go to a good home.

CAR DESCRIPTION FROM SELLER

This classic truck has undergone a complete frame off restoration. This truck was built with being a daily driver in mind but all the best parts have been purchased for this build. Please read the below. Key features are LS motor, Porterbuilt suspension, Accuair air-ride, Vintage air kit, Dakota digital gauges, Lexani wheels, new wiring harness, push to start go-keyless system, and more. Starting with the body, the truck started life as a long bed, the bed was shortened, raised and boxed The bed features a custom compartment that raises to reveal the accuair system, tank, compressors, and battery it is locked, and has a gas assist shock. All the bumpers were modified to fit snug to the body, they were sectioned and shortened, new trim kit was purchased and wrapped in matte black vinyl. New clear turn signals, new led tail lights and the headlights are from Trucklite. The entire engine bay has custom sheet metal design with dimple die with steel mesh. This is carried to the bed where the tubs also have the same design.Truck has a custom one off grill, with LED lights behind it. The suspension/chassis was completely replaced with a full Porterbuilt kit to lay frame, new upper and lower control arms, dropmember, crossmember, an adjustable wishbone rear end, all of this is controlled via Accuiar, two vair compressors, 4 corner sensors, the shocks are from Airride and have adjustable dampeners. All new steering rack and pinion, new CPP brake kit, cross drilled rotors. Completely rebuilt rear differential with posi was installed. All new lines/wiring on the truck including steel braided fuel lines with anodized fittings, and all new hard lines for the brakes. Relocated the gas tank and replaced with a Custom Boyd fuel cell (installed between the rails below the bed), with custom flush motorcycle gas cap installed in the back fender of the bed for that extra touch. All new trim package installed and wrapped in black vinyl. Heading to the bed, the truck has a MarK bedwood kit, the bed was shortened, Raised, custom hinge that raises on a gas shock to expose the accuair tank, compressors and VU4, all floating on an Accuair exo mount system (no rattling when the compression come on). The bed was sprayed with line-x and custom pop out tie downs were installed along with LED lights. To top this off, there is a custom locked compartment only accessible when the tailgate is down!Moving inside the truck was gutted, whole 5 gallon lizard skin sound proofing/ sealant was laid down, follow by dynamite along the firewall and transmission covering. All wiring redone and new wiring harness installed, Dakota digital gauges, new Ididit steering column, Billet specialities Camber steering wheel, vintage air kit installed for AC/heater, all interior steel painted black, set of two Chevy Tahoe seats, new pedals, new window motors installed, Keyless system for auto start, custom push buttons for all leds, lights, auto start, accessories etc. new glass was installed along with all new weather stripping. The interior has not been finished leaving the buyer a clean slate for seat covers, audio, and interior finishing. MotorA mild Cam was installed from comp cams, kooks headers, Holly intake manifold and holly EFI. All parts have been powedercoated black and site in a completely custom engine bay with one off fenders, dimple died and fabricated by nostalgia hot rods in Las Vegas. Flaws:Paint is not perfect, there is small damage to the back passenger side bed, interior is not finished. please let me know if you have any questions. i am happy to help this go to a good home.

BASIC CAR INFORMATION
Price:	48000 USD
Make:	Chevrolet
Model:	C-10
Year:	1966
Mileage:	950 MI
Trim:	C 10
Engine:	327
Transmission:	Automatic
Warranty:	Vehicle does NOT have an existing warranty

CONTACT SELLER

Chevrolet C-10 1966

See also

1974 Buick LeSabre

1975 Chevrolet Silverado

1973 Ford Bronco

1971 Chevrolet Corvette