317-522-8260 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384of84 1977 GMC K15 HIGH SIERRA 4X4 Stock #: 743523UC Exterior Color: BLACK Interior Color: RED Transmission: Automatic Title Condition: Clear 1977 GMC K1500 FENDERSIDE 4X4CHASSIS: TKL147F743523MILES: 3,718 rolled 103,718(total miles unknown)_____________________MORE VIDEOS HERE: 1977-gmc-k15-high-sierra-1_____________________In 1977 the third gen square body GMC series truck was four years into production and had seen several advanced updates to the previous truck designs of generations past. The new rounded lines moniker was evident of the new cab overhaul. Soft touch materials were used throughout the passenger cabin, such as the dashboard, doors (arm rests), steering wheel, and shift levers. You’ll also find Chestnut wood grained inserts on the dashboard. Safety updates were at the forefront of these third gen trucks. The first was the standard passenger-side sideview mirror, and the second was the energy-absorbing collapsible steering column. The third safety advancement was the introduction of dual front lap-and-shoulder safety belts with emergency locking retractors for outboard occupants. Other safety features included soft-padded interior panels for appearance and safety, 3,329 square inches of tempered and laminated safety glass, prismatic rearview mirror, six turn-signal indicator lamps with asymmetrical flash, four-way hazard function, and lane departure function.Third-generation Square-body K-Series pickups gained an all-new, high tensile strength carbon steel ladder type frame with "drop center" design. Steering controls included variable-ratio recirculating ball steering gear with optional hydraulic power assist. Braking controls included front self-adjusting disc brakes with rear finned drum brakes.All new K-Series pickups featured four-corner Vari-Ratemulti-leaf springs, front live axle with symmetrical (inline) shock absorber geometry, and the Load Control rear suspension system. K-Series pickups also featured an off-road oriented design, with the transfer case bolted directly to the transmission and running gear tucked up as high as possible under the vehicle to reduce the chances of snagging vital components on obstacles, as well as to achieve a low silhouette and optimal ground clearance. Exposed brake lines were wrapped in steel as standard. Full-time four-wheel drive pickups featured a two-speed New Process 203 transfer case with center differential and lock. Five positions were provided: High Loc, High, Neutral, Low, and Low Loc. In High the center differential was unlocked and allowed the front and rear propeller shafts to slip as needed for full-time operation. The system could be manually shifted into High Loc which locked the center differential for a locked 50:50 torque split. Low and Low Loc applied reduction gearing with or without lock, depending on the mode selected. Neutral was also available for use of the PTO. Fenderside models came with rigid, double-wall cab construction features side steps located between the rear fender and cab back that permit easy side loading and cargo handling for both work or recreation. The 6.5ft box is equipped with standard wood floors that provide good footing for livestock and permit nail-downs to help prevent cargo shifting. Smooth interior walls are ideal for many applications. Seven flush steel skid strips hold the wood floor in place yet allow for expansion with changes in temperature and humidity. A tight fitting tailgate helps keep bulk loads in the box. Reinforced stake pockets, for the addition of stake racks, are standard. The High Sierra model included seats trimmed in custom cloth and vinyl with a full-foam seat cushion and folding backrest. Additional interior equipment included: cigarette lighter; extra sound insulation; dome lamp with door-operated switches; color-keyed carpeting; and molded door trim panels with simulated chestnut appearance wood grained appliques and vinyl storage pockets. Also included is a color-keyed molded headliner with insulator. Exterior equipment included: bright front bumper; High Sierra emblems on front fenders; and bright windshield and rear window moldings. Also included are a bright cab back panel applique and bright metal hubcaps plus bright upper body side moldings. LET'S TALK ABOUT BLACKY…This 1977 SWB (117.5”) Fenderside half ton has been with the same family since 1996. The vehicle was gone through several years ago. From the first glimpse, this vehicle is a step back in time. The paint appears to have seen a respray, is deep, and in good condition with a high gloss finish. The 6.5ft step side box has standard wood floor in very good condition. You’ll find 5 spoke wheels resting on white lettered Trail King A/T tires. Moving into the interior you first notice the blood red seats and interior trim. The door cards and dash are in good condition and reflect the age of the vehicle. The carpets, seats and headliner are all in excellent condition and have obviously been in the hands of a proper upholstery shop.The instrument cluster and gauges appear to be working properly and knowing the engine has seen a few uprated items installed, you’ll find a separate oil pressure and water temp gauge under the front fascia panel. Speaking of the engine, under the hood you’ll find a 350 V8. Your eyes are immediately drawn to the Edelbrock Pro-Flo chrome air cleaner resting atop a menacing Demon 750 carburetor . The shiny Moroso chrome valve covers are parked around an Edelbrock performer intake manifold. We know there’s an aggressive cam in the vehicle, but do not know the model. Blacky is also equipped with full time 4wd and locking front hubs. Factory options included:· E62 – STEP SIDE PICK UP BOX· M40 – TURBO HYDRAMATIC TRANSMISSION· U76 – WINDSHIELD ANTENNA· XLC - L78-15/B ON-OFF ROAD BIAS PLY TUBELESS· ZLC - L78-15/B ON-OFF ROAD BIAS TUBELESS· Z84 – HIGH SIERRA EQUIPMENT· 9V1 – COLOR COMBINATION BLACK· DG4 – STAINLESS STEEL BELOW EYE-LINE EXTERIOR MIRRORS· LS9 - 350 CID 4-BBL V8· N41 – VARIABLE RATIO POWER · VF1 – CHROMED REAR BUMPER· YLC - L78-15/B ON-OFF ROAD BIAS PLY TUBELESS· Z53 - VOLTMETER, TEMPERATURE, AND OIL PRESSURE GAUGE· 71W – XRR1 PREMIUM RED VINYL BENCH SEATAs of April 2020, this vehicle was driven from Ohio to Indianapolis and inspected by The Car Vault in Brownsburg, IN. The following items were noted:· NEW FRONT CALIPERS/WHEEL CYLINDERS· 50% LIFE LEFT ON BRAKES· COULD USE BIAS ADJUSTER AS TRUCK HAS TOO MUCH REAR BRAKE · SMALL DIFFERENTIAL COVER LEAK· SMALL FRONT COVER LEAK ON ENGINE· EARLS INLINE FUEL FILTER· BATTERY IN GOOD CONDITION· HEATER SWITCH IS UNPLUGGED· TRANSMISSION HAS SMALL PAN LEAK· PATCH PANELS ON DRIVER FLOOR IN GOOD CONDITION· SMALL RUST SPOT ON CHASSIS UNDER DRIVER SIDE· TRANSMISSION HAS SHIFT KIT INSTALLED· LOUD CHERRY BOMB MUFFLERSThe following items were serviced:· INSTALLED NEW SPARK PLUGS· INSTALLED NEW SPARK PLUG WIRE SET· REBUILT DEMON CARBURETOR AND SET IDLEMore information on the 1977 model year K series:WIKIPDF_______________________Please consider this an invitation to visit MOTORVAULT! If you have any questions or wish for more information about this vehicle or any other vehicle, please do not hesitate to call Brian Henry @ 317-522-8260 or email Vehicle Description 1977 GMC K1500 FENDERSIDE 4X4CHASSIS: TKL147F743523MILES: 3,718 rolled 103,718 (total miles unknown)__________________MORE PHOTOS AND VIDEOS HERE: https://motorvault.com/1977-gmc-k15-high-sierra-1__________________In 1977 the third gen square body GMC series truck was four years into production and had seen several advanced updates to the previous truck designs of generations past. The new rounded lines moniker was evident of the new cab overhaul. Soft touch materials were used throughout the passenger cabin, such as the dashboard, doors (arm rests), steering wheel, and shift levers. You’ll also find Chestnut wood grained inserts on the dashboard. Safety updates were at the forefront of these third gen trucks. The first was the standard passenger-side sideview mirror, and the second was the energy-absorbing collapsible steering column. The third safety advancement was the introduction of dual front lap-and-shoulder safety belts with emergency locking retractors for outboard occupants. Other safety features included soft-padded interior panels for appearance and safety, 3,329 square inches of tempered and laminated safety glass, prismatic rearview mirror, six turn-signal indicator lamps with asymmetrical flash, four-way hazard function, and lane departure function.Third-generation Square-body K-Series pickups gained an all-new, high tensile strength carbon steel ladder type frame with "drop center" design. Steering controls included variable-ratio recirculating ball steering gear with optional hydraulic power assist. Braking controls included front self-adjusting disc brakes with rear finned drum brakes.All new K-Series pickups featured four-corner Vari-Ratemulti-leaf springs, front live axle with symmetrical (inline) shock absorber geometry, and the Load Control rear suspension system. K-Series pickups also featured an off-road oriented design, with the transfer case bolted directly to the transmission and running gear tucked up as high as possible under the vehicle to reduce the chances of snagging vital components on obstacles, as well as to achieve a low silhouette and optimal ground clearance. Exposed brake lines were wrapped in steel as standard. Full-time four-wheel drive pickups featured a two-speed New Process 203 transfer case with center differential and lock. Five positions were provided: High Loc, High, Neutral, Low, and Low Loc. In High the center differential was unlocked and allowed the front and rear propeller shafts to slip as needed for full-time operation. The system could be manually shifted into High Loc which locked the center differential for a locked 50:50 torque split. Low and Low Loc applied reduction gearing with or without lock, depending on the mode selected. Neutral was also available for use of the PTO. Fenderside models came with rigid, double-wall cab construction features side steps located between the rear fender and cab back that permit easy side loading and cargo handling for both work or recreation. The 6.5ft box is equipped with standard wood floors that provide good footing for livestock and permit nail-downs to help prevent cargo shifting. Smooth interior walls are ideal for many applications. Seven flush steel skid strips hold the wood floor in place yet allow for expansion with changes in temperature and humidity. A tight fitting tailgate helps keep bulk loads in the box. Reinforced stake pockets, for the addition of stake racks, are standard. The High Sierra model included seats trimmed in custom cloth and vinyl with a full-foam seat cushion and folding backrest. Additional interior equipment included: cigarette lighter; extra sound insulation; dome lamp with door-operated switches; color-keyed carpeting; and molded door trim panels with simulated chestnut appearance wood grained appliques and vinyl storage pockets. Also included is a color-keyed molded headliner with insulator. Exterior equipment included: bright front bumper; High Sierra emblems on front fenders; and bright windshield and rear window moldings. Also included are a bright cab back panel applique and bright metal hubcaps plus bright upper body side moldings. LET'S TALK ABOUT BLACKY…This 1977 SWB (117.5”) Fenderside half ton has been with the same family since 1996. The vehicle was gone through several years ago. From the first glimpse, this vehicle is a step back in time. The paint appears to have seen a respray, is deep, and in good condition with a high gloss finish. The 6.5ft step side box has standard wood floor in very good condition. You’ll find 5 spoke wheels resting on white lettered Trail King A/T tires. Moving into the interior you first notice the blood red seats and interior trim. The door cards and dash are in good condition and reflect the age of the vehicle. The carpets, seats and headliner are all in excellent condition and have obviously been in the hands of a proper upholstery shop.The instrument cluster and gauges appear to be working properly and knowing the engine has seen a few uprated items installed, you’ll find a separate oil pressure and water temp gauge under the front fascia panel. Speaking of the engine, under the hood you’ll find a 350 V8. Your eyes are immediately drawn to the Edelbrock Pro-Flo chrome air cleaner resting atop a menacing Demon 750 carburetor . The shiny Moroso chrome valve covers are parked around an Edelbrock performer intake manifold. We know there’s an aggressive cam in the vehicle, but do not know the model. Blacky is also equipped with full time 4wd and locking front hubs. Factory options included:· E62 – STEP SIDE PICK UP BOX· M40 – TURBO HYDRAMATIC TRANSMISSION· U76 – WINDSHIELD ANTENNA· XLC - L78-15/B ON-OFF ROAD BIAS PLY TUBELESS· ZLC - L78-15/B ON-OFF ROAD BIAS TUBELESS· Z84 – HIGH SIERRA EQUIPMENT· 9V1 – COLOR COMBINATION BLACK· DG4 – STAINLESS STEEL BELOW EYE-LINE EXTERIOR MIRRORS· LS9 - 350 CID 4-BBL V8· N41 – VARIABLE RATIO POWER · VF1 – CHROMED REAR BUMPER· YLC - L78-15/B ON-OFF ROAD BIAS PLY TUBELESS· Z53 - VOLTMETER, TEMPERATURE, AND OIL PRESSURE GAUGE· 71W – XRR1 PREMIUM RED VINYL BENCH SEATAs of April 2020, this vehicle was driven from Ohio to Indianapolis and inspected by . The following items were noted:· NEW FRONT CALIPERS/WHEEL CYLINDERS· 50% LIFE LEFT ON BRAKES· COULD USE BIAS ADJUSTER AS TRUCK HAS TOO MUCH REAR BRAKE · SMALL DIFFERENTIAL COVER LEAK· SMALL FRONT COVER LEAK ON ENGINE· EARLS INLINE FUEL FILTER· BATTERY IN GOOD CONDITION· HEATER SWITCH IS UNPLUGGED· TRANSMISSION HAS SMALL PAN LEAK· PATCH PANELS ON DRIVER FLOOR IN GOOD CONDITION· SMALL RUST SPOT ON CHASSIS UNDER DRIVER SIDE· TRANSMISSION HAS SHIFT KIT INSTALLED· LOUD CHERRY BOMB MUFFLERSThe following items were serviced:· INSTALLED NEW SPARK PLUGS· INSTALLED NEW SPARK PLUG WIRE SET· REBUILT DEMON CARBURETOR AND SET IDLEMore information on the 1977 model year K series:_______________________Please consider this an invitation to visit MOTORVAULT! If you have any questions or wish for more information about this vehicle or any other vehicle, please do not hesitate to call Brian Henry @ 317-522-8260 or email Vehicle Warranty VEHICLE SOLD AS IS. NO DEALER WARRANTY IMPLIED NOR APPLIED. About Motorvault As a locally-owned small business, we strive to exceed your expectations! With over 20 years of sales, consignment, brokerage and marketing experience of high-line and exotic vehicles, we opened our doors to work with like-minded enthusiasts. We wanted to make the sales process easy. If you're looking to sell or buy your next daily, or in search of your next track car, MOTORVAULT is here to help. As a locally-owned small business, we strive to exceed your expectations! With over 20 years of sales, consignment, brokerage and marketing experience of high-line and exotic vehicles, we opened our doors to work with like-minded enthusiasts. We wanted to make the sales process easy. If you're looking to sell or buy your next daily, or in search of your next track car, MOTORVAULT is here to help. Contact us for more details 317-522-8260 Terms and Conditions Payment Options We accept the following payment methods: - Cashier's Check/money order- Personal check (once cleared) Vehicle Pickup & Shipping All shipping charges are buyer's responsibility. Finance, Warranty, Shipping question? Call the dealer at 317-522-8260 General Terms Notice to Bidders: All of the vehicles we list on eBay are for sale locally. We reserve the right to end an auction early. Deposit: We require a non-refundable $500 deposit within 48 hours of winning the auction. Please call to make arrangements for payment. Payment Types: Cash in person, Certified Funds, Institutional Financing All sales transactions must be completed within 7 calendar days of auction close. Prices subject to change without notice and do not include Title, License, Registration Fees, State or Local Taxes or Processing Fees, if any. Please contact seller first for vehicle availability. Although every effort is made to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. It is the sole responsibility of the customer to verify the existence of options, accessories and the vehicle condition before time of sale. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. Notice to Bidders: All of the vehicles we list on eBay are for sale locally. We reserve the right to end an auction early. Deposit: We require a non-refundable $500 deposit within 48 hours of winning the auction. Please call to make arrangements for payment. Payment Types: Cash in person, Certified Funds, Institutional Financing All sales transactions must be completed within 7 calendar days of auction close. Prices subject to change without notice and do not include Title, License, Registration Fees, State or Local Taxes or Processing Fees, if any. Please contact seller first for vehicle availability. Although every effort is made to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. It is the sole responsibility of the customer to verify the existence of options, accessories and the vehicle condition before time of sale. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. Fees and Taxes Out of state buyers are responsible for paying tax, title, license and documentation fee. The customer is responsible for registering the vehicle in their home state. Please reach out to dealer for details. |