Ford Bronco 1975

18995 USD

CAR DESCRIPTION FROM SELLER
Early Bronco Roller - This was built as a high end bronco project and the previous owner decided to go with a fully articulating frame and coyote set up. This would be a replacement frame for your existing bronco. There is no VIN on this frame and no title is available, again this would be a set up for someone who already owns a bronco and would like to upgrade their existing bronco. Please don't ask about getting a title in our State as that would be your responsibility to find out if that's possible. Sold with a bill of sale only. This set up has ZERO miles and is ready for an EFI setup like Sniper or similar. You could run a standard carb you would just need to change the fuel pump for your application. Add up everything below you will find it would take over $30K to have a shop do this for you, of course this depends on the shop rate in your area, could be more if your on the West or East coast. If you did everything yourself your looking at the low 20's. Save yourself some time and money and headaches. The original owner spent well over $30K. Crate 302 / Jasper Rebuilt AOD / Dana 20 Transfer case / Drive lines rebuilt / 2.5" complete lift kit / Adjustable Rancho Shocks / Front Disc brake conversion / Dana 44 with new ball joints, inner and outer bearings / Warn Premium Locking hubs / Rear Drums completely rebuilt / Slot wheels in Satin Black / Toyo Open Country 265/75/15 tires / Frame Sand blasted and painted / Complete exhaust system / 23 Gallon fuel tank with EFI internal tank pump / All fuel and brake lines ran / Power steering box with pump. I am sure I am leaving out stuff, but this is a complete roller ready for your bronco body. Roller is located in 77498, Houston, TX area. I can help set up shipping at your cost if needed.

CAR DESCRIPTION FROM SELLER

Early Bronco Roller - This was built as a high end bronco project and the previous owner decided to go with a fully articulating frame and coyote set up. This would be a replacement frame for your existing bronco. There is no VIN on this frame and no title is available, again this would be a set up for someone who already owns a bronco and would like to upgrade their existing bronco. Please don't ask about getting a title in our State as that would be your responsibility to find out if that's possible. Sold with a bill of sale only. This set up has ZERO miles and is ready for an EFI setup like Sniper or similar. You could run a standard carb you would just need to change the fuel pump for your application. Add up everything below you will find it would take over $30K to have a shop do this for you, of course this depends on the shop rate in your area, could be more if your on the West or East coast. If you did everything yourself your looking at the low 20's. Save yourself some time and money and headaches. The original owner spent well over $30K. Crate 302 / Jasper Rebuilt AOD / Dana 20 Transfer case / Drive lines rebuilt / 2.5" complete lift kit / Adjustable Rancho Shocks / Front Disc brake conversion / Dana 44 with new ball joints, inner and outer bearings / Warn Premium Locking hubs / Rear Drums completely rebuilt / Slot wheels in Satin Black / Toyo Open Country 265/75/15 tires / Frame Sand blasted and painted / Complete exhaust system / 23 Gallon fuel tank with EFI internal tank pump / All fuel and brake lines ran / Power steering box with pump. I am sure I am leaving out stuff, but this is a complete roller ready for your bronco body. Roller is located in 77498, Houston, TX area. I can help set up shipping at your cost if needed.

BASIC CAR INFORMATION
Price:	18995 USD
Make:	Ford
Model:	Bronco
Year:	1975
Mileage:	N/A
Transmission:	Automatic

CONTACT SELLER

Ford Bronco 1975

See also

1968 Cadillac CONVERTIBLE

1968 Pontiac GTO

1957 Chrysler 300 Series

1967 Fiat 500