Ford Coupe Hot Rod 1933

225000 USD

CAR DESCRIPTION FROM SELLER
(630) 567-0066 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758of58 1933 Ford Coupe All Steel Award Winning Hot Rod Known As "LEETHL" Stock #: 21 Exterior Color: Green Interior Color: Tan Body Type: Coupe Transmission: 4 Speed Fuel Type: Gasoline Engine: Blown 350 Mileage: 0 I am pleased to offer this incredible, one-of-a-kind, award winning, turnkey, magazine car/show car affectionately dubbed "LEETHL". No need to spend $1 million on a show car and wait 2 years for it to be built. It's already built and available at a fraction of the original build cost. The current owner has owned this car since the 1990's and has invested approx. $500,000 in building and maintaining this gorgeous street rod. This ALL STEEL 1933 Ford Coupe hot rod was formerly owned by Larry Woods, co-founder of Mattel Hot Wheels fame. You can buy this car today, trailer it to a show and undoubtedly win trophies on day one. Please note that it is right hand drive and currently located in Australia. Converting it back to left hand drive if desired is very doable and reasonable. VIN # is SN2613388 and engine number is V817P.This car has been invited to participate in the Meguiar's MotorEx Superstars show (Feb. 2021) in Australia. Approx. 60 of the best cars that were built over the last 20 years are invited to participate in the prestigious competition. The grand champion will be crowned and this car has a great chance of winning best car of all time in Australia. That says a lot about the quality of this car. As they say however, it's quite an honor just to be invited. Starting with the body, it was in great shape when handed over to Deuce Customs in Melbourne, Australia. They braced it out, did the 3” roof chop, filled the opening in the roof, the firewall remade and recessed. A new floor was created and fitted throughout leaving the show finish needed ( beautiful job ). An 80 liter fuel tank fabricated and mounted behind the seat. A lot of time went into the original fenders to show quality and fit, the front fenders were joined to the running boards for that clean flowing look. The tilt hood was made up from an original, again to wow at shows. Deuce Customs also did a massive amount of smaller tasks such as fitting the air conditioning and the condenser mounted at the rear, the '39 tail lights, the flush mount gas filler, door hinges shaved etc. Electric windows were fitted, the trunk now also is opened by remote. The body was made ready for the mold to be taken to create the countless fiberglass bodies sold world wide and then handed over to the paint shop where 9 coats of Hot House green were applied.Alongside Deuce Customs, a company called Rod City went to work on the original chassis where it was boxed, smoothed, X member fitted, and the extra members needed for suspension and engine etc. The chassis was stepped and tubbed. The narrowed Ford 9” was fitted along with the parallel 4 bar coil overs. A fully detailed independent front end was fitted with rack and pinion. The brake lines were run through the chassis for the clean look, A custom bench seat was fabricated, seat belt mounts, and a host of other details.The drivetrain is a 4 bolt 350 bored 0.10” with Arias blower pistons, 8”1, steel crank, all internals balanced and blueprinted, Crow cam, Melling oil pump, Edelbrock aluminum heads, Weiand blower manifold, 671 blower, 2 x Holley 650 detailed carbs, Weiand polished water pump and MSD ignition.Detailed air compressor, alternator, starter motor, polished oil pan, custom headers, custom engine mounts. Instead of de – burring the block, custom made polished aluminum covers that fit under the engine mounts and hug the motor and makes the engine look like a block of aluminum were fabricated. Looks fantastic and duly noticed by the show judges. Scatter shield bell housing is a fully chromed unit, the gearbox is a Ford top loader 4 speed with every part fully chromed. The driveshaft is a heavy duty fully chromed and polished. The differential is a Ford 9” LSD polished Strange unit.The brakes are all disc, the calipers polished and detailed. The rotors chromed with braided lines. Detailed booster and master cylinder. Custom made pedal assembly fully polished.The interior is simple and clean and has a tremendous air of class. Quality leather was used along with Mercedes Benz carpeting and headliner, Billet Speciality steering column and wheel. The latest Dakota needle gauge set, seat belts, billet handles, electric windows, (the switches and controls they are all hidden above the driver in the headliner). The complete interior is beautifully finished. The trunk is finished to the same high standard.Head lights used are '34 commercial with the turn signals fitted into the buckets. The grill is the cars original and its been restored to a beautiful finish. The radiator is a Walker with a electric fan. The wheels are a new set hand made from Real Rodder with Spinners 15” x 12” and 15” x 5". Tires are Hoosier. The car runs and drives beautifully. It's currently not for sale in Australia nor has it been. This is the first time that it's been on the market since the 90's. Quite a rare opportunity. Owner would be over-joyed if the car went back to America to be enjoyed by an American car enthusiast. This car although completed in 2004, still shows beautifully today. This is a tribute to the very high quality paint and body work and build quality. The owner notes that he spent approx. $65,000 in 2019 to freshened up the car cosmetically. This included:Interior had new headliner installed, new carpeting, the console around the gear shifter, new steering wheel, new set of Dakota gauges, glove box lid, the trunk was fully redone. The blower was sent out and taken down and rebuilt, New rocker covers were painted, carbs sent out and rebuilt and chromed. New plugs and leads. Headers sent out and re-coated. The full exhaust sent out and fully polished. Heaps of Aluminum parts sent out for polishing. The rear end painted, steering rack painted, oil pan, All new brakes throughout, new calipers and polished, new booster and painted, The 4 rotors sent out and chromed along with the clutch master cylinder and slave cylinder. Bell housing sent out and chromed. New set of Rodder wheels and Hoosier tires . Water pump and radiator painted and serviced. The switches inside were relocated into the headliner (out of sight). More chrome under the hood. Tail lights and the grill sent out and fully done. Under side of the hood repainted (it really didn't need it but it got done). Air conditioning re-charged, hoses and belts changed.Some History:This car, in a more simple state, left Larry Woods collection in the 70's and went to Tasmania. Car sat in Tasmania for 20 years without being touched. In the 90's, it went to Australia when the current owner purchased it. The car was completed in 2004 at a cost of approx. $500,000. To duplicate it today would be at least $1 million. Once completed, this amazing hot rod went on the Australian car show circuit where it won every award possible.Comments From a Well Known US Car Builder:I asked a well known US car builder if he would look over my ad for this car and offer comments. See his comments below: I looked over the photos and this car is incredible. All the right bits and pieces are there and the money certainly has been spent to make it an amazing show car. The provenance of the owner combined with the award winning history are very attractive; someone who buys this vehicle has an instant show-winner as soon as they roll it out of the trailer. An in-person or close-photo inspection of seams, gaps, and welds would show how well the joints and structure are holding up over time. (chassis are made to flex, and sometimes paint and filler can't withstand how steel moves under stress... this is not uncommon but judges look for this kind of wear in a points-gathering show) That said, NONE of the pictures reveal any of that aging, and it all looks perfect.If the photos appear distorted in this listing, please copy and paste the link below to see full undistorted photos:inventory/listing/1933-ford-coupe-all-steel Vehicle Description Please note that the current location of this car is Australia (not Northern VA. as noted). It can be brought to the US for a reasonable price via ocean freight or via air freight for a higher price (obviously). Owner would like to see this car back on US soil. I am pleased to offer this incredible, one-of-a-kind, award winning, turnkey, magazine car/show car affectionately dubbed "LEETHL". No need to spend $1 million on a show car and wait 2 years for it to be built. It's already built and available at a fraction of the original build cost. The current owner has owned this car since the 1990's and has invested approx. $500,000 in building and maintaining this gorgeous street rod. This ALL STEEL 1933 Ford Coupe hot rod was formerly owned by Larry Woods, co-founder of Mattel Hot Wheels fame. You can buy this car today, trailer it to a show and undoubtedly win trophies on day one. Please note that it is right hand drive and currently located in Australia. Converting it back to left hand drive if desired is very doable and reasonable. VIN # is SN2613388 and engine number is V817P.This car has been invited to participate in the Meguiar's MotorEx Superstars show (Feb. 2021) in Australia. Approx. 60 of the best cars that were built over the last 20 years are invited to participate in the prestigious competition. The grand champion will be crowned and this car has a great chance of winning best car of all time in Australia. That says a lot about the quality of this car. As they say however, it's quite an honor just to be invited. Starting with the body, it was in great shape when handed over to Deuce Customs in Melbourne, Australia. They braced it out, did the 3” roof chop, filled the opening in the roof, the firewall remade and recessed. A new floor was created and fitted throughout leaving the show finish needed ( beautiful job ). An 80 liter fuel tank fabricated and mounted behind the seat. A lot of time went into the original fenders to show quality and fit, the front fenders were joined to the running boards for that clean flowing look. The tilt hood was made up from an original, again to wow at shows. Deuce Customs also did a massive amount of smaller tasks such as fitting the air conditioning and the condenser mounted at the rear, the '39 tail lights, the flush mount gas filler, door hinges shaved etc. Electric windows were fitted, the trunk now also is opened by remote. The body was made ready for the mold to be taken to create the countless fiberglass bodies sold world wide and then handed over to the paint shop where 9 coats of Hot House green were applied.Alongside Deuce Customs, a company called Rod City went to work on the original chassis where it was boxed, smoothed, X member fitted, and the extra members needed for suspension and engine etc. The chassis was stepped and tubbed. The narrowed Ford 9” was fitted along with the parallel 4 bar coil overs. A fully detailed independent front end was fitted with rack and pinion. The brake lines were run through the chassis for the clean look, A custom bench seat was fabricated, seat belt mounts, and a host of other details.The drivetrain is a 4 bolt 350 bored 0.10” with Arias blower pistons, 8”1, steel crank, all internals balanced and blueprinted, Crow cam, Melling oil pump, Edelbrock aluminum heads, Weiand blower manifold, 671 blower, 2 x Holley 650 detailed carbs, Weiand polished water pump and MSD ignition.Detailed air compressor, alternator, starter motor, polished oil pan, custom headers, custom engine mounts. Instead of de – burring the block, custom made polished aluminum covers that fit under the engine mounts and hug the motor and makes the engine look like a block of aluminum were fabricated. Looks fantastic and duly noticed by the show judges. Scatter shield bell housing is a fully chromed unit, the gearbox is a Ford top loader 4 speed with every part fully chromed. The driveshaft is a heavy duty fully chromed and polished. The differential is a Ford 9” LSD polished Strange unit.The brakes are all disc, the calipers polished and detailed. The rotors chromed with braided lines. Detailed booster and master cylinder. Custom made pedal assembly fully polished.The interior is simple and clean and has a tremendous air of class. Quality leather was used along with Mercedes Benz carpeting and headliner, Billet Speciality steering column and wheel. The latest Dakota needle gauge set, seat belts, billet handles, electric windows, (the switches and controls they are all hidden above the driver in the headliner). The complete interior is beautifully finished. The trunk is finished to the same high standard.Head lights used are '34 commercial with the turn signals fitted into the buckets. The grill is the cars original and its been restored to a beautiful finish. The radiator is a Walker with a electric fan. The wheels are a new set hand made from Real Rodder with Spinners 15” x 12” and 15” x 5". Tires are Hoosier. The car runs and drives beautifully. It's currently not for sale in Australia nor has it been. This is the first time that it's been on the market since the 90's. Quite a rare opportunity. Owner would be over-joyed if the car went back to America to be enjoyed by an American car enthusiast. This car although completed in 2004, still shows beautifully today. This is a tribute to the very high quality paint and body work and build quality. The owner notes that he spent approx. $65,000 in 2019 to freshened up the car cosmetically. This included:Interior had new headliner installed, new carpeting, the console around the gear shifter, new steering wheel, new set of Dakota gauges, glove box lid, the trunk was fully redone. The blower was sent out and taken down and rebuilt, New rocker covers were painted, carbs sent out and rebuilt and chromed. New plugs and leads. Headers sent out and re-coated. The full exhaust sent out and fully polished. Heaps of Aluminum parts sent out for polishing. The rear end painted, steering rack painted, oil pan, All new brakes throughout, new calipers and polished, new booster and painted, The 4 rotors sent out and chromed along with the clutch master cylinder and slave cylinder. Bell housing sent out and chromed. New set of Rodder wheels and Hoosier tires . Water pump and radiator painted and serviced. The switches inside were relocated into the headliner (out of sight). More chrome under the hood. Tail lights and the grill sent out and fully done. Under side of the hood repainted (it really didn't need it but it got done). Air conditioning re-charged, hoses and belts changed.Some History:This car, in a more simple state, left Larry Woods collection in the 70's and went to Tasmania. Car sat in Tasmania for 20 years without being touched. In the 90's, it went to Australia when the current owner purchased it. The car was completed in 2004 at a cost of approx. $500,000. To duplicate it today would be at least $1 million. Once completed, this amazing hot rod went on the Australian car show circuit where it won every award possible.Comments From a Well Known US Car Builder:I asked a well known US car builder if he would look over my ad for this car and offer comments. See his comments below: I looked over the photos and this car is incredible. All the right bits and pieces are there and the money certainly has been spent to make it an amazing show car. The provenance of the owner combined with the award winning history are very attractive; someone who buys this vehicle has an instant show-winner as soon as they roll it out of the trailer. An in-person or close-photo inspection of seams, gaps, and welds would show how well the joints and structure are holding up over time. (chassis are made to flex, and sometimes paint and filler can't withstand how steel moves under stress... this is not uncommon but judges look for this kind of wear in a points-gathering show) That said, NONE of the pictures reveal any of that aging, and it all looks perfect.If the photos appear distorted in this listing, please copy and paste the link below to see full undistorted photos:https://www.ronsusser.com/inventory/listing/1933-ford-coupe-all-steel-award-winning-hot-rod-known-as-leethl/ Vehicle Warranty This item or vehicle is being sold as is, where is with no warranty, expressed written or implied unless there is a warranty in effect from the factory. About Ron Susser Be sure to visit my website at www.ronsusser.com. Lots of great cars, motorcycles, watches, artwork, collectibles to browse. Take advantage of proxy bidding: Don’t loose the vehicle at the last minute! There have been many people who have lost bids in the past because they were not familiar with proxy bidding. When you bid, bid the maximum amount that you are willing to spend on the vehicle. Each time someone bids higher than your last bid, eBay will automatically increment your bid by the minimum bid amount until it reaches your maximum. Don’t get stuck loosing a good deal! Testimonials – Bid with Confidence Read what a buyer has to say about the quality of my service after he purchased a great 1988 Lotus Esprit S4 Turbo “AAA+++, This is the way Ebay is supposed to work. Everybody is happy!!! Thanks.” Read what a buyer has to say about the quality of my service after he purchased a beautiful 1970 Mercedes 280SL. “My acquisition of a vehicle with Ron conducting the transaction went without a single problem. The description of the car was complete, informative and quite accurate. There were no surprises. All my questions and concerns were promptly addressed. His attention to details continued beyond the actual sale until the car was safely in my garage. As a new buyer I had only a positive experience and recommend him to the eBay community without reservation.” Read what another buyer had to say when he received his 1958 Cadillac Eldorado Brougham. “Car better than expected, Ron is prompt, friendly and honest, Highly Recommend!!” Read what another person who purchased an ’88 Mercedes 560SL had to say “Thanks, Ron, for your prompt, courteous and honest service. I’ve been looking for the right ’88-’89 MB 560SL for the past three years – you found it for me! I couldn’t be more pleased with the responsive, highly professional manner in which you handled my special needs. I’ll buy from you again”. Be sure to visit my website at www.ronsusser.com. Lots of great cars, motorcycles, watches, artwork, collectibles to browse. Take advantage of proxy bidding: Don’t loose the vehicle at the last minute! There have been many people who have lost bids in the past because they were not familiar with proxy bidding. When you bid, bid the maximum amount that you are willing to spend on the vehicle. Each time someone bids higher than your last bid, eBay will automatically increment your bid by the minimum bid amount until it reaches your maximum. Don’t get stuck loosing a good deal! Testimonials – Bid with Confidence Read what a buyer has to say about the quality of my service after he purchased a great 1988 Lotus Esprit S4 Turbo “AAA+++, This is the way Ebay is supposed to work. Everybody is happy!!! Thanks.” Read what a buyer has to say about the quality of my service after he purchased a beautiful 1970 Mercedes 280SL. “My acquisition of a vehicle with Ron conducting the transaction went without a single problem. The description of the car was complete, informative and quite accurate. There were no surprises. All my questions and concerns were promptly addressed. His attention to details continued beyond the actual sale until the car was safely in my garage. As a new buyer I had only a positive experience and recommend him to the eBay community without reservation.” Read what another buyer had to say when he received his 1958 Cadillac Eldorado Brougham. “Car better than expected, Ron is prompt, friendly and honest, Highly Recommend!!” Read what another person who purchased an ’88 Mercedes 560SL had to say “Thanks, Ron, for your prompt, courteous and honest service. I’ve been looking for the right ’88-’89 MB 560SL for the past three years – you found it for me! I couldn’t be more pleased with the responsive, highly professional manner in which you handled my special needs. I’ll buy from you again”. Contact us for more details (630) 567-0066 Terms and Conditions Payment Options We accept the following payment methods: - Cashier's Check/money order- Cash (in person) Vehicle Pickup & Shipping All shipping charges are buyer's responsibility. Finance, Warranty, Shipping question? Call the dealer at (630) 567-0066 General Terms Vehicles & Other Items This item or vehicle is being sold as is, where is with no warranty, expressed written or implied unless there is a warranty in effect from the factory. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the vehicle, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgement solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the vehicle or item. Seller reserves the right not to sell to any bidder with 0 or negative feedback or to any bidder for any reason. 10% (non-refundable deposit) in certified funds or bank to bank wire transfer is due within 2 business days of auction end and balance is due within 7 business days of auction end. Buyer is responsible for cost of shipping but seller may be able to assist in arranging shipping. I can be reached at (630) 567-0066 to discuss the item. Please see my other auctions for high quality new and used vehicles and other quality collectibles. Remember that your bid constitutes a legally binding contract to purchase this item. If you require an inspection, have it done prior to bidding. I strongly encourage all bidders to inspect vehicle personally or enlist the services of a professional inspector prior to placing a bid. After the sale, inspections are not recognized as a contingency to completing your obligation to your winning bid. If there are any questions regarding the above terms, please e-mail prior to bidding. Serious bidders only please. Good luck! Fees and Taxes www.ronsusser.com

CAR DESCRIPTION FROM SELLER

(630) 567-0066 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758of58 1933 Ford Coupe All Steel Award Winning Hot Rod Known As "LEETHL" Stock #: 21 Exterior Color: Green Interior Color: Tan Body Type: Coupe Transmission: 4 Speed Fuel Type: Gasoline Engine: Blown 350 Mileage: 0 I am pleased to offer this incredible, one-of-a-kind, award winning, turnkey, magazine car/show car affectionately dubbed "LEETHL". No need to spend $1 million on a show car and wait 2 years for it to be built. It's already built and available at a fraction of the original build cost. The current owner has owned this car since the 1990's and has invested approx. $500,000 in building and maintaining this gorgeous street rod. This ALL STEEL 1933 Ford Coupe hot rod was formerly owned by Larry Woods, co-founder of Mattel Hot Wheels fame. You can buy this car today, trailer it to a show and undoubtedly win trophies on day one. Please note that it is right hand drive and currently located in Australia. Converting it back to left hand drive if desired is very doable and reasonable. VIN # is SN2613388 and engine number is V817P.This car has been invited to participate in the Meguiar's MotorEx Superstars show (Feb. 2021) in Australia. Approx. 60 of the best cars that were built over the last 20 years are invited to participate in the prestigious competition. The grand champion will be crowned and this car has a great chance of winning best car of all time in Australia. That says a lot about the quality of this car. As they say however, it's quite an honor just to be invited. Starting with the body, it was in great shape when handed over to Deuce Customs in Melbourne, Australia. They braced it out, did the 3” roof chop, filled the opening in the roof, the firewall remade and recessed. A new floor was created and fitted throughout leaving the show finish needed ( beautiful job ). An 80 liter fuel tank fabricated and mounted behind the seat. A lot of time went into the original fenders to show quality and fit, the front fenders were joined to the running boards for that clean flowing look. The tilt hood was made up from an original, again to wow at shows. Deuce Customs also did a massive amount of smaller tasks such as fitting the air conditioning and the condenser mounted at the rear, the '39 tail lights, the flush mount gas filler, door hinges shaved etc. Electric windows were fitted, the trunk now also is opened by remote. The body was made ready for the mold to be taken to create the countless fiberglass bodies sold world wide and then handed over to the paint shop where 9 coats of Hot House green were applied.Alongside Deuce Customs, a company called Rod City went to work on the original chassis where it was boxed, smoothed, X member fitted, and the extra members needed for suspension and engine etc. The chassis was stepped and tubbed. The narrowed Ford 9” was fitted along with the parallel 4 bar coil overs. A fully detailed independent front end was fitted with rack and pinion. The brake lines were run through the chassis for the clean look, A custom bench seat was fabricated, seat belt mounts, and a host of other details.The drivetrain is a 4 bolt 350 bored 0.10” with Arias blower pistons, 8”1, steel crank, all internals balanced and blueprinted, Crow cam, Melling oil pump, Edelbrock aluminum heads, Weiand blower manifold, 671 blower, 2 x Holley 650 detailed carbs, Weiand polished water pump and MSD ignition.Detailed air compressor, alternator, starter motor, polished oil pan, custom headers, custom engine mounts. Instead of de – burring the block, custom made polished aluminum covers that fit under the engine mounts and hug the motor and makes the engine look like a block of aluminum were fabricated. Looks fantastic and duly noticed by the show judges. Scatter shield bell housing is a fully chromed unit, the gearbox is a Ford top loader 4 speed with every part fully chromed. The driveshaft is a heavy duty fully chromed and polished. The differential is a Ford 9” LSD polished Strange unit.The brakes are all disc, the calipers polished and detailed. The rotors chromed with braided lines. Detailed booster and master cylinder. Custom made pedal assembly fully polished.The interior is simple and clean and has a tremendous air of class. Quality leather was used along with Mercedes Benz carpeting and headliner, Billet Speciality steering column and wheel. The latest Dakota needle gauge set, seat belts, billet handles, electric windows, (the switches and controls they are all hidden above the driver in the headliner). The complete interior is beautifully finished. The trunk is finished to the same high standard.Head lights used are '34 commercial with the turn signals fitted into the buckets. The grill is the cars original and its been restored to a beautiful finish. The radiator is a Walker with a electric fan. The wheels are a new set hand made from Real Rodder with Spinners 15” x 12” and 15” x 5". Tires are Hoosier. The car runs and drives beautifully. It's currently not for sale in Australia nor has it been. This is the first time that it's been on the market since the 90's. Quite a rare opportunity. Owner would be over-joyed if the car went back to America to be enjoyed by an American car enthusiast. This car although completed in 2004, still shows beautifully today. This is a tribute to the very high quality paint and body work and build quality. The owner notes that he spent approx. $65,000 in 2019 to freshened up the car cosmetically. This included:Interior had new headliner installed, new carpeting, the console around the gear shifter, new steering wheel, new set of Dakota gauges, glove box lid, the trunk was fully redone. The blower was sent out and taken down and rebuilt, New rocker covers were painted, carbs sent out and rebuilt and chromed. New plugs and leads. Headers sent out and re-coated. The full exhaust sent out and fully polished. Heaps of Aluminum parts sent out for polishing. The rear end painted, steering rack painted, oil pan, All new brakes throughout, new calipers and polished, new booster and painted, The 4 rotors sent out and chromed along with the clutch master cylinder and slave cylinder. Bell housing sent out and chromed. New set of Rodder wheels and Hoosier tires . Water pump and radiator painted and serviced. The switches inside were relocated into the headliner (out of sight). More chrome under the hood. Tail lights and the grill sent out and fully done. Under side of the hood repainted (it really didn't need it but it got done). Air conditioning re-charged, hoses and belts changed.Some History:This car, in a more simple state, left Larry Woods collection in the 70's and went to Tasmania. Car sat in Tasmania for 20 years without being touched. In the 90's, it went to Australia when the current owner purchased it. The car was completed in 2004 at a cost of approx. $500,000. To duplicate it today would be at least $1 million. Once completed, this amazing hot rod went on the Australian car show circuit where it won every award possible.Comments From a Well Known US Car Builder:I asked a well known US car builder if he would look over my ad for this car and offer comments. See his comments below: I looked over the photos and this car is incredible. All the right bits and pieces are there and the money certainly has been spent to make it an amazing show car. The provenance of the owner combined with the award winning history are very attractive; someone who buys this vehicle has an instant show-winner as soon as they roll it out of the trailer. An in-person or close-photo inspection of seams, gaps, and welds would show how well the joints and structure are holding up over time. (chassis are made to flex, and sometimes paint and filler can't withstand how steel moves under stress... this is not uncommon but judges look for this kind of wear in a points-gathering show) That said, NONE of the pictures reveal any of that aging, and it all looks perfect.If the photos appear distorted in this listing, please copy and paste the link below to see full undistorted photos:inventory/listing/1933-ford-coupe-all-steel Vehicle Description Please note that the current location of this car is Australia (not Northern VA. as noted). It can be brought to the US for a reasonable price via ocean freight or via air freight for a higher price (obviously). Owner would like to see this car back on US soil. I am pleased to offer this incredible, one-of-a-kind, award winning, turnkey, magazine car/show car affectionately dubbed "LEETHL". No need to spend $1 million on a show car and wait 2 years for it to be built. It's already built and available at a fraction of the original build cost. The current owner has owned this car since the 1990's and has invested approx. $500,000 in building and maintaining this gorgeous street rod. This ALL STEEL 1933 Ford Coupe hot rod was formerly owned by Larry Woods, co-founder of Mattel Hot Wheels fame. You can buy this car today, trailer it to a show and undoubtedly win trophies on day one. Please note that it is right hand drive and currently located in Australia. Converting it back to left hand drive if desired is very doable and reasonable. VIN # is SN2613388 and engine number is V817P.This car has been invited to participate in the Meguiar's MotorEx Superstars show (Feb. 2021) in Australia. Approx. 60 of the best cars that were built over the last 20 years are invited to participate in the prestigious competition. The grand champion will be crowned and this car has a great chance of winning best car of all time in Australia. That says a lot about the quality of this car. As they say however, it's quite an honor just to be invited. Starting with the body, it was in great shape when handed over to Deuce Customs in Melbourne, Australia. They braced it out, did the 3” roof chop, filled the opening in the roof, the firewall remade and recessed. A new floor was created and fitted throughout leaving the show finish needed ( beautiful job ). An 80 liter fuel tank fabricated and mounted behind the seat. A lot of time went into the original fenders to show quality and fit, the front fenders were joined to the running boards for that clean flowing look. The tilt hood was made up from an original, again to wow at shows. Deuce Customs also did a massive amount of smaller tasks such as fitting the air conditioning and the condenser mounted at the rear, the '39 tail lights, the flush mount gas filler, door hinges shaved etc. Electric windows were fitted, the trunk now also is opened by remote. The body was made ready for the mold to be taken to create the countless fiberglass bodies sold world wide and then handed over to the paint shop where 9 coats of Hot House green were applied.Alongside Deuce Customs, a company called Rod City went to work on the original chassis where it was boxed, smoothed, X member fitted, and the extra members needed for suspension and engine etc. The chassis was stepped and tubbed. The narrowed Ford 9” was fitted along with the parallel 4 bar coil overs. A fully detailed independent front end was fitted with rack and pinion. The brake lines were run through the chassis for the clean look, A custom bench seat was fabricated, seat belt mounts, and a host of other details.The drivetrain is a 4 bolt 350 bored 0.10” with Arias blower pistons, 8”1, steel crank, all internals balanced and blueprinted, Crow cam, Melling oil pump, Edelbrock aluminum heads, Weiand blower manifold, 671 blower, 2 x Holley 650 detailed carbs, Weiand polished water pump and MSD ignition.Detailed air compressor, alternator, starter motor, polished oil pan, custom headers, custom engine mounts. Instead of de – burring the block, custom made polished aluminum covers that fit under the engine mounts and hug the motor and makes the engine look like a block of aluminum were fabricated. Looks fantastic and duly noticed by the show judges. Scatter shield bell housing is a fully chromed unit, the gearbox is a Ford top loader 4 speed with every part fully chromed. The driveshaft is a heavy duty fully chromed and polished. The differential is a Ford 9” LSD polished Strange unit.The brakes are all disc, the calipers polished and detailed. The rotors chromed with braided lines. Detailed booster and master cylinder. Custom made pedal assembly fully polished.The interior is simple and clean and has a tremendous air of class. Quality leather was used along with Mercedes Benz carpeting and headliner, Billet Speciality steering column and wheel. The latest Dakota needle gauge set, seat belts, billet handles, electric windows, (the switches and controls they are all hidden above the driver in the headliner). The complete interior is beautifully finished. The trunk is finished to the same high standard.Head lights used are '34 commercial with the turn signals fitted into the buckets. The grill is the cars original and its been restored to a beautiful finish. The radiator is a Walker with a electric fan. The wheels are a new set hand made from Real Rodder with Spinners 15” x 12” and 15” x 5". Tires are Hoosier. The car runs and drives beautifully. It's currently not for sale in Australia nor has it been. This is the first time that it's been on the market since the 90's. Quite a rare opportunity. Owner would be over-joyed if the car went back to America to be enjoyed by an American car enthusiast. This car although completed in 2004, still shows beautifully today. This is a tribute to the very high quality paint and body work and build quality. The owner notes that he spent approx. $65,000 in 2019 to freshened up the car cosmetically. This included:Interior had new headliner installed, new carpeting, the console around the gear shifter, new steering wheel, new set of Dakota gauges, glove box lid, the trunk was fully redone. The blower was sent out and taken down and rebuilt, New rocker covers were painted, carbs sent out and rebuilt and chromed. New plugs and leads. Headers sent out and re-coated. The full exhaust sent out and fully polished. Heaps of Aluminum parts sent out for polishing. The rear end painted, steering rack painted, oil pan, All new brakes throughout, new calipers and polished, new booster and painted, The 4 rotors sent out and chromed along with the clutch master cylinder and slave cylinder. Bell housing sent out and chromed. New set of Rodder wheels and Hoosier tires . Water pump and radiator painted and serviced. The switches inside were relocated into the headliner (out of sight). More chrome under the hood. Tail lights and the grill sent out and fully done. Under side of the hood repainted (it really didn't need it but it got done). Air conditioning re-charged, hoses and belts changed.Some History:This car, in a more simple state, left Larry Woods collection in the 70's and went to Tasmania. Car sat in Tasmania for 20 years without being touched. In the 90's, it went to Australia when the current owner purchased it. The car was completed in 2004 at a cost of approx. $500,000. To duplicate it today would be at least $1 million. Once completed, this amazing hot rod went on the Australian car show circuit where it won every award possible.Comments From a Well Known US Car Builder:I asked a well known US car builder if he would look over my ad for this car and offer comments. See his comments below: I looked over the photos and this car is incredible. All the right bits and pieces are there and the money certainly has been spent to make it an amazing show car. The provenance of the owner combined with the award winning history are very attractive; someone who buys this vehicle has an instant show-winner as soon as they roll it out of the trailer. An in-person or close-photo inspection of seams, gaps, and welds would show how well the joints and structure are holding up over time. (chassis are made to flex, and sometimes paint and filler can't withstand how steel moves under stress... this is not uncommon but judges look for this kind of wear in a points-gathering show) That said, NONE of the pictures reveal any of that aging, and it all looks perfect.If the photos appear distorted in this listing, please copy and paste the link below to see full undistorted photos:https://www.ronsusser.com/inventory/listing/1933-ford-coupe-all-steel-award-winning-hot-rod-known-as-leethl/ Vehicle Warranty This item or vehicle is being sold as is, where is with no warranty, expressed written or implied unless there is a warranty in effect from the factory. About Ron Susser Be sure to visit my website at www.ronsusser.com. Lots of great cars, motorcycles, watches, artwork, collectibles to browse. Take advantage of proxy bidding: Don’t loose the vehicle at the last minute! There have been many people who have lost bids in the past because they were not familiar with proxy bidding. When you bid, bid the maximum amount that you are willing to spend on the vehicle. Each time someone bids higher than your last bid, eBay will automatically increment your bid by the minimum bid amount until it reaches your maximum. Don’t get stuck loosing a good deal! Testimonials – Bid with Confidence Read what a buyer has to say about the quality of my service after he purchased a great 1988 Lotus Esprit S4 Turbo “AAA+++, This is the way Ebay is supposed to work. Everybody is happy!!! Thanks.” Read what a buyer has to say about the quality of my service after he purchased a beautiful 1970 Mercedes 280SL. “My acquisition of a vehicle with Ron conducting the transaction went without a single problem. The description of the car was complete, informative and quite accurate. There were no surprises. All my questions and concerns were promptly addressed. His attention to details continued beyond the actual sale until the car was safely in my garage. As a new buyer I had only a positive experience and recommend him to the eBay community without reservation.” Read what another buyer had to say when he received his 1958 Cadillac Eldorado Brougham. “Car better than expected, Ron is prompt, friendly and honest, Highly Recommend!!” Read what another person who purchased an ’88 Mercedes 560SL had to say “Thanks, Ron, for your prompt, courteous and honest service. I’ve been looking for the right ’88-’89 MB 560SL for the past three years – you found it for me! I couldn’t be more pleased with the responsive, highly professional manner in which you handled my special needs. I’ll buy from you again”. Be sure to visit my website at www.ronsusser.com. Lots of great cars, motorcycles, watches, artwork, collectibles to browse. Take advantage of proxy bidding: Don’t loose the vehicle at the last minute! There have been many people who have lost bids in the past because they were not familiar with proxy bidding. When you bid, bid the maximum amount that you are willing to spend on the vehicle. Each time someone bids higher than your last bid, eBay will automatically increment your bid by the minimum bid amount until it reaches your maximum. Don’t get stuck loosing a good deal! Testimonials – Bid with Confidence Read what a buyer has to say about the quality of my service after he purchased a great 1988 Lotus Esprit S4 Turbo “AAA+++, This is the way Ebay is supposed to work. Everybody is happy!!! Thanks.” Read what a buyer has to say about the quality of my service after he purchased a beautiful 1970 Mercedes 280SL. “My acquisition of a vehicle with Ron conducting the transaction went without a single problem. The description of the car was complete, informative and quite accurate. There were no surprises. All my questions and concerns were promptly addressed. His attention to details continued beyond the actual sale until the car was safely in my garage. As a new buyer I had only a positive experience and recommend him to the eBay community without reservation.” Read what another buyer had to say when he received his 1958 Cadillac Eldorado Brougham. “Car better than expected, Ron is prompt, friendly and honest, Highly Recommend!!” Read what another person who purchased an ’88 Mercedes 560SL had to say “Thanks, Ron, for your prompt, courteous and honest service. I’ve been looking for the right ’88-’89 MB 560SL for the past three years – you found it for me! I couldn’t be more pleased with the responsive, highly professional manner in which you handled my special needs. I’ll buy from you again”. Contact us for more details (630) 567-0066 Terms and Conditions Payment Options We accept the following payment methods: - Cashier's Check/money order- Cash (in person) Vehicle Pickup & Shipping All shipping charges are buyer's responsibility. Finance, Warranty, Shipping question? Call the dealer at (630) 567-0066 General Terms Vehicles & Other Items This item or vehicle is being sold as is, where is with no warranty, expressed written or implied unless there is a warranty in effect from the factory. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the vehicle, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgement solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the vehicle or item. Seller reserves the right not to sell to any bidder with 0 or negative feedback or to any bidder for any reason. 10% (non-refundable deposit) in certified funds or bank to bank wire transfer is due within 2 business days of auction end and balance is due within 7 business days of auction end. Buyer is responsible for cost of shipping but seller may be able to assist in arranging shipping. I can be reached at (630) 567-0066 to discuss the item. Please see my other auctions for high quality new and used vehicles and other quality collectibles. Remember that your bid constitutes a legally binding contract to purchase this item. If you require an inspection, have it done prior to bidding. I strongly encourage all bidders to inspect vehicle personally or enlist the services of a professional inspector prior to placing a bid. After the sale, inspections are not recognized as a contingency to completing your obligation to your winning bid. If there are any questions regarding the above terms, please e-mail prior to bidding. Serious bidders only please. Good luck! Fees and Taxes www.ronsusser.com

BASIC CAR INFORMATION
Price:	225000 USD
Make:	Ford
Model:	Coupe Hot Rod
Year:	1933
Mileage:	N/A
Trim:	Award Winning Show Car
Engine:	Blown 350
Transmission:	4 Speed
Warranty:	Unspecified

CONTACT SELLER

Ford Coupe Hot Rod 1933

See also

1965 Dodge Dart

1968 Ford Mustang Official Licensed Eleanor Tribute Edition

1970 Chevrolet Chevelle

1970 Pontiac Firebird