Chevrolet Blazer, SW Texas truck, nominal rust in the body, 2 small holes where driver floor board meets the rocker panel, small spot in passenger rear quarter and tailgate as photographed. All other areas are solid!!! This truck is solid and a bit rough, however 90% of the roughness is all bolt on stuff, hood, front fender and driver door. The body itself, top and chassis is almost perfect as compared to many. Previous owner installed a later 5.7L Throttle Body Injected engine it all works with no issues, turbo 350 transmission shifts smooth, NP 203 transfer case seems to work as it should, shifter is sloppy. 4 - 6" spring and block lift, drives well, steering is a bit sloppy but no wobble, pulling or vibration. Brakes as it should. Rear tailgate and glass woorks as it should, new regulator in rear, doors open and close and windows roll up and down, passenger side window needs some adjustment. Interior is from a later donor and dyed the tan color, otherwise is pretty good for a beater. A/C and heater components are there but not hooked up. I will replace the windshield and have Texas inspection first week of December. This truck could be a daily beater, hunting rig, beach rig or an excellent candidate for restoration due to the lack of rust in the main portions of the body. I will assist with delivery or shipping logistics at the expense of the buyer. |