Chevrolet Chevelle 1970

95000 USD

CAR DESCRIPTION FROM SELLER
We operate an auto restoration business in the Phoenix, Arizona metro area. We have agreed to sell this 1970 LS6 Chevelle for our customer. www.qualitymusclecarrestorations.com Serious prospects are welcome to test drive this vehicle. A hoist is available at our shop to inspect the undercarriage. This vehicle came equipped and its new car dealer with the following: 952, Exterior Color, Cranberry Red 755, Black Vinyl Bench Seat Interior AK1, Deluxe Seat Belts AO1, Tinted Glass B93, Door Edge Guards C08. Black Vinyl Top LS6: 450 hp, 454 Engine M40, Turbo Hy-matic Transmission N40, Power Steering T60, HD Battery U63, AM Radio, replaced with AM Eight Track Radio by the new car selling dealer U80, Rear Seat Speaker ZL2, Cowl Induction Hood Z15, SS454 Equipment The following documents for this vehicle were examined and believed to be original, not reproductions:1. Build Sheet2. Window Sticker3. Warranty Protecto-Plate Folder4. New Car Dealer Folder issued by new car selling dealer, Gene Teague Chevrolet, Stayton, Oregon5. Owner Manual Please find listed below are the findings regarding this vehicle’s originality and condition. I. Originality. The following items have been physically examined and judged as original or not original to vehicle. Items not listed below have not been inspected for originality A. Engine, 1. The engine block casting date, “K 5 9” or November 5,1969; located on the LH or driver’s side of the engine block, horizontal surface behind the passenger side cylinder head, had been photographeda. This casting date is consistent with engine assembly date, as seen on the original Protecto-plate which is “1 21” or an engine assembly date of January 21, 1970.2. The engine block casting number, “3963512” or November 5,1969; located on the driver’s or LH side of the engine block, horizontal surface behind the LH side cylinder head, had been photographeda. Casting number “3963512” was only used on 1969 427s and 1970-71 454s.3. This engine block has the provision for an external oil cooler and has four bolt mains, exclusive to 1970 LS6 #512 blocksa. This feature has been photographed.4. The engine block VIN number stamp, assembly date and engine id code, located passenger side horizontal surface ahead of RH cylinder head has been re-stamped, and has been photographed,a. Block has had to been decked during a prior rebuild, resulting in the original stamping be lost. b. Someone has attempted a poor re-stamp. i. Broach marks are missing. ii. The first two characters are also missing from the partial VIN stamp iii. Assembly date on block re-stamp is “2 17” and the one on the original Protecto-plate is “1 21.” iv. The “CRR” stamp has much more definition than other originals we have observed.Summary: This Engine block assembly is the original, born-with item installed at the Arlington assembly plant. Because this engine has its original #512 block, that it’s casting date is in line with all other components (Build sheet, Protecto-Plate, date codes on Transmission, Differential, Carburetor and distributor); it our opinion that even though this block has been re-stamped but is original to this vehicle.B. Transmission 1. ID TAG, containing “CY”, “353” located on the tag riveted on the vertical surface, passenger side of the main transmission case, has been photographeda. “CY” is the correct transmission ID code for 1970 Chevelles with LS6 and L78 solid lifter engines.b. “353” is the Julian date of this transmission’s assembly date which is December 17, 1969. i. This data is consistent with the way this vehicle was equipped from the factory, per the pro-tecto plate and build sheet. ii. The assembly date is consistent with the vehicle’s January 1970 assembly date. 2. VIN Stamp, “10R203756” located on the LH-driver’s-vertical surface of transmission case, has been photographed. a. “10R203756” is the portion of the full VIN number as it appears on horizontal surface of the dash panel, driver’s side, directly behind the windshield glass.Summary: This transmission assembly is the original, born-with item installed at the Arlington assembly plant. Tag and stamp on transmission is unaltered and is consistent with others we seen, inspected, photographed, etc. C. Differential 1. The “CRU” ID Code is correct for a 1970 Chevelle equipped with 3.31 gears and no posi. It has been photographed, appears to not have been altered and is visible on the vertical surface of the passenger side, front of the differential tube. 2. The assembly date, “12 05 B 2” translates to December 5, 1969, Buffalo NY Second Shift assembly plant. It has been photographed, appears to be unaltered and is visible on the vertical surface of the passenger side, front of the differential tube. 3. Differential housing casting date, “L 1 9” or November 1, 1969, has been photographed, is cast into the housing, is unaltered and is consistent with the differential’s assembly date which is 30 days later. This casting date can be seen on the rear vertical surface, passenger side of the differential housing. Summary: This Differential assembly is the original, born-with item installed at the Arlington assembly plant. The stamped area is unaltered and is consistent with others we seen, inspected, photographed, etc. Additional information regarding this vehicle’s Differential ID Code: The correct code for a 4.10 Posi is “CKK”, not “CRU.” We suspect the factory incorrectly stamped this housing. Or this vehicle was mistakenly delivered new with 3.31 gears, rather than 4.10 ratio listed on the build sheet. D. Distributor 1. Stamp on housing, “111437” and “9L11” located on vertical surface, side of distributor housing, has been photographed. a. “1111437” is the correct Distributor ID Code for 1970 LS6 Chevelles onlyb. “9 L 11” or November 11, 1969 is the distributor’s assembly date i. This data is consistent with the vehicle’s final assembly date of January, 1970 and the data listed on the vehicle protecto-plate, build sheet, etc. Summary: Distributor assembly is the original, born-with item installed at the Arlington assembly plant. This distributor’s stamping is unaltered and is consistent with others we seen, inspected, photographed, etc. E. Carburetor1. Stamp on housing, “3969898”, “9 B 2” located on vertical surface, air horn, RH side, has been photographed. a. “3969898” is the correct Carburetor ID Code for 1970 LS6 Chevelles equipped with automatic transmissions, onlyb. “9 B 2” or the second week of December, 1969 is this carburetor’s assembly date i. This data is consistent with the vehicle’s final assembly date of January, 1970 and the data listed on the vehicle protecto-plate, build sheet, etc. Summary: Carburetor assembly is the original, born-with item installed at the Arlington assembly plant. This carburetor’s stamping is unaltered and is consistent with others we seen, inspected, photographed, etc. F. VIN Tag1. VIN tag “136370R203756” located on horizontal surface, drivers side, behind windshield glass is clearly visible, and was photographeda. “1” = Chevrolet Divisionb. “36” = Chevrolet Malibu 8 Cylinder Enginec. “37” = Two Door Hardtopd. “0” = 1970e. “R” = Assembly plant, Arlington, Texasf. “203756” = VIN number of vehicle that also matches VIN stamp on engine block, transmission, Protecto-Plate, Build Sheet, New Car Invoice and Window StickerSummary: VIN tag is the original, born-with item installed at the Arlington assembly plant. VIN tag appears to be unaltered, showing normal wear and aging for being 50 years, and is consistent with others we seen, inspected, photographed, etc. G. Cowl Tag1. Cowl Tag, located on horizontal LH rear surface, under hood, on top of the cowl, clearly visible, was photographedg. “70” = Year of manufactureh. “13637” = Malibu Two Door Hardtop, 8 cylinderi. “755” = Trim, Black Vinyl Bench Seat Interiorj. “01C” = Build Date, Body, Third Week of January 1970k. “75 B” = Paint and Top, Cranberry Red Exterior Paint with a Black Vinyl Topl. “BT” = Assembly Plant, Arlington Texasm. “03048” = Fisher Body Sequence Number Summary: Body tag is the original, born-with item installed at the Arlington assembly plant.· Body tag appears to be unaltered, is held in place with it original fasteners, and is consistent with others we seen, inspected, photographed, etc. · Codes on cowl tag match the way this vehicle is equipped. H. Brakes, Master Cylinder Assembly1. This is the original factory installed Delco Moraine component a. This item has been photographed. I. Alternator1. Has a 834 Delco Remy Number, should be #837a. This component is not the original item installed at the factoryb. This item has been photographed. J. Ignition Coil, #2931. This is the original factory installed Delco Remy component or an exact reproductiona. This item has been photographed. K. Intake Manifold, #39635361. This is the factory installed component installed on the engine at the Tonawanda Engine plant. a. This item has been photographed. II. II. ConditionA. Exterior. 1. Paint and Vinyl Topa. The exterior finish appears to have redone in last 10-15 years, is in good condition with very little orange peel, especially on the horizontal surfaces i. Our detail service recently color sanded all exterior surfaces and buffed, polished as needed to bring the vehicle to its full potential. ii. In the middle of the LR quarter panel, above the wheel opening, some filler cracking can be seen if you look hard enough for it. b. Panel fit is excellent and gaps between doors, deck lid, hood, etc as good or better than newc. The vinyl top appears to be fairly new, fits correctly and has the correct original grain and configuration. 2. Exterior trim, bumpers, grill, lights, lensa. All but the front and rear bumpers, appear to be excellent restored or original condition and are showing very little or no wearb. The front and rear bumpers are high quality reproduction items. 3. Doors, ease of closinga. Both doors open and close easilyb. Side glass fit to either other and body is excellent 4. Stainless exterior trim, windshield and side glass, wiper armsa. All trim appear to be in excellent restored or original condition and are showing very little or no wearb. Windshield is a reproduction with LOF etchings. The date code has not been checked. c. Door and rear window glass appear to be original to vehicle and are showing moderate scratches i. We did not take the time to check these item’s date codes and ascertain for sure if they are original to the vehicle 5. Tires, wheels, center caps and trim ringsa. Tires are the correct size reproduction Firestone Wide Ovals and showing little or no wear i. No cracking or weather-checking is visible ii. We did not check the manufacture date on tiresb. Wheels and center caps have not pulled and verified but we believe they are original to vehicle i. These items appear to be in good original condition ii. We will verify whether the four wheels on the ground before the vehicle is advertised. c. Trim rings on four wheels on ground are reproduction items. B. Undercarriage:1. General Conditiona. This vehicle has never received a frame-off or rotisserie restoration, just routine maintenance. i. No collision damage is visible, such as, a bent frame, damaged control arms, trailing arms, core support, etc. ii. All control arm bushings, rubber parts appear to be good condition and are showing little or no wear iii. Both front and rear coil springs have been replaced resulting the vehicle’s curb height being slightly higher than original. iv. Brakes, Steering, front and rear suspension all appear to be in good, driver condition· Calipers, rotors and drums appear to be original GM components, not generic replacements· All components are covered with rattle-can black paint v. All four shock absorbers are fairly new replacement, non-original gas items 2. Frame, control arms, and other suspension parts are not rust pitted and appear to have never been exposed to four-seasons type, weather, road salt, or high humiditya. Frame side rails have been slightly bent by the prior use of a floor jack3. Exhaust system, is showing some wear, and is a decent quality replacement system without resonatorsa. Correct GM replacement exhaust extensions or “cow bells” are present.b. No rust holes can be seen. 4. The differential assembly is un-restored, has been spray painted over moderate surface rusta. No damage can be seen to either the diff housing and its related componentsb. No leaks can be seen. 5. Floor pan, fuel tank and fuel lines, under-body are in good original or restored conditiona. Factory original body Schultz sound deadener is present in both rear wheel house areas, is in good condition and leads us to believe this vehicle has not sustained any or very little collision damageb. Fuel and brake lines are appear to be original or reproduction components in good conditionc. Fuel tank is a reproduction replacement item. d. Floor pan is original, undamaged and has had restoration black rattle-can overspray installed in an amateur fashion. i. No rust repair can be seen or suspectede. Factory pinch welds are present on the bottom of both quarters, between trunk, drop-down panels and the quarter panels themselves behind the rear wheel openings. f. No after-market tar, undercoating or filler materials are present that would be used cover up of rust or collision damage. C. Under-Hood:1. Overall condition is to a good restored level, but not to a national show level quality. a. All items are relatively clean and appear fully functionalb. Restoration is not to a national judging standard level. i. Items like hood hinges, latches, catches, etc. are painted rather than be plated in their correct original black-oxide, zinc or phosphate finishes. ii. Paint can be seen on fasteners that should plated finish 2. Engine assemblya. Clean and refinished in the correct orange finishb. Exhaust manifolds suffer from minor discoloring as a result of vehicle being stored for a short period of time in some humidity. i. Exhaust manifolds are believed to be original to vehicle but we have not verifiedc. Minor oil leaks are seen coming from the rear main seal and oil pan 3. All factory emission or smog parts including the pump, hoses, etc. are present including the TCS (Transmission Control System)a. Both systems appear to be working. b. The LH air tube for the smog system is not of the correct configuration. 4. Brake components, including lines, master cylinder and power brake boostera. Lines are good quality replacement or original items in good condition.b. PB Booster is either a original rebuilt or reproduction component in good working orderc. The master cylinder is the original Delco componentd. No leaks are present 5. Alternator, Battery and charging systema. The alternator is a non-original replacement part in good working order. Alternator output was recently checked and is good. b. The fasteners attaching the alternator and smog pump to the engine are not correctc. All wiring appears to be in good conditiond. Belt is a quanta reproduction parte. Battery is a brand new generic side terminal replacement with a Delco topper installed. 6. Wiper motor and related partsa. All are present, are in good working order and appear to be excellent restored or original components. 7. Horns and wiring harnessesa. Both original horns are present, working and in good conditionb. All wiring harnesses are either original or reproduction and in good condition8. Cowl Induction system a. All components are present, are in good working order and appear to be excellent restored or original components. 9. Radiator and cooling systema. All items appear to be in good-working order b. Hoses and clamps are reproduction partsc. No coolant leaks are present. d. The radiator is a fairly new generic replacement item. 10. Power steering systema. All components are present, are in good working order and appear to be in excellent restored or original condition b. PS Belt is a Quanta reproduction itemc. The steering box, PS pump and steering column appear to be original and in good working order. d. No leaks are presente. Hoses are generic replacements D. Interior:1. Dash, dash pad, electrical switches, gauges, heater controls, radioa. Dash assembly is an original component, not reproduction, and is in fair to good condition i. No cracks or holes cut in this assembly are visibleb. Tachometer is a reproduction itemc. The fuel gauge is not the correct item for a factory tach and gauge installation. d. The dash pad is original and is in good original conditione. Some gauges have been replaced by after-market itemsf. All lights work in dash except for the RH turn signal indicator. g. Radio is original AM-Eight Track unit and is showing some moderate aging and wear i. Per the original purchase agreement, the new car selling dealer installed this item. 2. Seats and Seat Belts, all components, frames, seat material, plastic seat backs, etc. a. Are a original or reproduction components in good to excellent conditionb. Pleats in front and rear seat material are present, and are of the correct original configuration. 3. Door panels and windshield interior moldingsa. Are original components in good to excellent condition 4. Carpet and Sill Platesa. Are quality reproduction items in good to excellent condition 5. Under-dash, wiring, heater box, etc. a. All components including the firewall pad, heater box, pedal assembly are original and in good un-restored conditionb. The under dash wiring harness appears to be butchered somewhat for the installation of aftermarket gauges. 6. Steering column assembly and steering wheela. Cancelling function works for turn signalb. Both items are in good restored condition. 7. Door Jam Areasa. We believe the painted surfaces in the door jamb areas are original finishes installed at the factory. b. Weather-striping and seals are original and in good to excellent condition. c. “Manufacturer by General Motors” ID Tag listing vehicles VIN and Assembly Date appears to be original, not reproduction item. 8. Head liner, sail panels, package tray and interior moldingsa. All items are either excellent original or high quality reproduction items. E. Trunk:1. Trunk floor, all metal surfaces seen inside trunka. Top side of trunk floor, inside surfaces of both quarter panels, wheel tubs and bottom surfaces of package tray appear to be original, not rust pitted or to have had any collision or rust repairsb. Quarter panel and trunk walls have their original spackle paint, and are original to vehicle. 2. Spare tire and bumper jack componentsa. All jack components are original and present and are in good un-restored conditionb. The spare tire and Uniroyal wheel are the original components. 3. Trunk mat, weather-strip, and painted finishes inside trunka. Trunk mat and weather-strip are quality reproduction partsb. Spackle finish is trunk and been redone on the horizontal surfaces, not the quarter walls III. Operations A. All lights work except the RH in-dash directional indicatorB. Engine starts easily and runs smoothly with lots of power. 1. A moderate oil leak is observed coming from the rear main sealC. Transmission shifts smoothly 1. Passing gear works2. Moderate leaks can be seen at the pan and tail shaft seal D. No differential whining noise can be heard. E. Steering is smooth, 1. Steering wheel appears to be centered when going forward2. Steering does not pull to one side or the otherF. Brakes work as they should1. No leaks have been observed2. Pedal is hard and vehicle stops straight, i.e., does not pull one way for the other. 180 digital photos document our findings and opinion.

CAR DESCRIPTION FROM SELLER

We operate an auto restoration business in the Phoenix, Arizona metro area. We have agreed to sell this 1970 LS6 Chevelle for our customer. www.qualitymusclecarrestorations.com Serious prospects are welcome to test drive this vehicle. A hoist is available at our shop to inspect the undercarriage. This vehicle came equipped and its new car dealer with the following: 952, Exterior Color, Cranberry Red 755, Black Vinyl Bench Seat Interior AK1, Deluxe Seat Belts AO1, Tinted Glass B93, Door Edge Guards C08. Black Vinyl Top LS6: 450 hp, 454 Engine M40, Turbo Hy-matic Transmission N40, Power Steering T60, HD Battery U63, AM Radio, replaced with AM Eight Track Radio by the new car selling dealer U80, Rear Seat Speaker ZL2, Cowl Induction Hood Z15, SS454 Equipment The following documents for this vehicle were examined and believed to be original, not reproductions:1. Build Sheet2. Window Sticker3. Warranty Protecto-Plate Folder4. New Car Dealer Folder issued by new car selling dealer, Gene Teague Chevrolet, Stayton, Oregon5. Owner Manual Please find listed below are the findings regarding this vehicle’s originality and condition. I. Originality. The following items have been physically examined and judged as original or not original to vehicle. Items not listed below have not been inspected for originality A. Engine, 1. The engine block casting date, “K 5 9” or November 5,1969; located on the LH or driver’s side of the engine block, horizontal surface behind the passenger side cylinder head, had been photographeda. This casting date is consistent with engine assembly date, as seen on the original Protecto-plate which is “1 21” or an engine assembly date of January 21, 1970.2. The engine block casting number, “3963512” or November 5,1969; located on the driver’s or LH side of the engine block, horizontal surface behind the LH side cylinder head, had been photographeda. Casting number “3963512” was only used on 1969 427s and 1970-71 454s.3. This engine block has the provision for an external oil cooler and has four bolt mains, exclusive to 1970 LS6 #512 blocksa. This feature has been photographed.4. The engine block VIN number stamp, assembly date and engine id code, located passenger side horizontal surface ahead of RH cylinder head has been re-stamped, and has been photographed,a. Block has had to been decked during a prior rebuild, resulting in the original stamping be lost. b. Someone has attempted a poor re-stamp. i. Broach marks are missing. ii. The first two characters are also missing from the partial VIN stamp iii. Assembly date on block re-stamp is “2 17” and the one on the original Protecto-plate is “1 21.” iv. The “CRR” stamp has much more definition than other originals we have observed.Summary: This Engine block assembly is the original, born-with item installed at the Arlington assembly plant. Because this engine has its original #512 block, that it’s casting date is in line with all other components (Build sheet, Protecto-Plate, date codes on Transmission, Differential, Carburetor and distributor); it our opinion that even though this block has been re-stamped but is original to this vehicle.B. Transmission 1. ID TAG, containing “CY”, “353” located on the tag riveted on the vertical surface, passenger side of the main transmission case, has been photographeda. “CY” is the correct transmission ID code for 1970 Chevelles with LS6 and L78 solid lifter engines.b. “353” is the Julian date of this transmission’s assembly date which is December 17, 1969. i. This data is consistent with the way this vehicle was equipped from the factory, per the pro-tecto plate and build sheet. ii. The assembly date is consistent with the vehicle’s January 1970 assembly date. 2. VIN Stamp, “10R203756” located on the LH-driver’s-vertical surface of transmission case, has been photographed. a. “10R203756” is the portion of the full VIN number as it appears on horizontal surface of the dash panel, driver’s side, directly behind the windshield glass.Summary: This transmission assembly is the original, born-with item installed at the Arlington assembly plant. Tag and stamp on transmission is unaltered and is consistent with others we seen, inspected, photographed, etc. C. Differential 1. The “CRU” ID Code is correct for a 1970 Chevelle equipped with 3.31 gears and no posi. It has been photographed, appears to not have been altered and is visible on the vertical surface of the passenger side, front of the differential tube. 2. The assembly date, “12 05 B 2” translates to December 5, 1969, Buffalo NY Second Shift assembly plant. It has been photographed, appears to be unaltered and is visible on the vertical surface of the passenger side, front of the differential tube. 3. Differential housing casting date, “L 1 9” or November 1, 1969, has been photographed, is cast into the housing, is unaltered and is consistent with the differential’s assembly date which is 30 days later. This casting date can be seen on the rear vertical surface, passenger side of the differential housing. Summary: This Differential assembly is the original, born-with item installed at the Arlington assembly plant. The stamped area is unaltered and is consistent with others we seen, inspected, photographed, etc. Additional information regarding this vehicle’s Differential ID Code: The correct code for a 4.10 Posi is “CKK”, not “CRU.” We suspect the factory incorrectly stamped this housing. Or this vehicle was mistakenly delivered new with 3.31 gears, rather than 4.10 ratio listed on the build sheet. D. Distributor 1. Stamp on housing, “111437” and “9L11” located on vertical surface, side of distributor housing, has been photographed. a. “1111437” is the correct Distributor ID Code for 1970 LS6 Chevelles onlyb. “9 L 11” or November 11, 1969 is the distributor’s assembly date i. This data is consistent with the vehicle’s final assembly date of January, 1970 and the data listed on the vehicle protecto-plate, build sheet, etc. Summary: Distributor assembly is the original, born-with item installed at the Arlington assembly plant. This distributor’s stamping is unaltered and is consistent with others we seen, inspected, photographed, etc. E. Carburetor1. Stamp on housing, “3969898”, “9 B 2” located on vertical surface, air horn, RH side, has been photographed. a. “3969898” is the correct Carburetor ID Code for 1970 LS6 Chevelles equipped with automatic transmissions, onlyb. “9 B 2” or the second week of December, 1969 is this carburetor’s assembly date i. This data is consistent with the vehicle’s final assembly date of January, 1970 and the data listed on the vehicle protecto-plate, build sheet, etc. Summary: Carburetor assembly is the original, born-with item installed at the Arlington assembly plant. This carburetor’s stamping is unaltered and is consistent with others we seen, inspected, photographed, etc. F. VIN Tag1. VIN tag “136370R203756” located on horizontal surface, drivers side, behind windshield glass is clearly visible, and was photographeda. “1” = Chevrolet Divisionb. “36” = Chevrolet Malibu 8 Cylinder Enginec. “37” = Two Door Hardtopd. “0” = 1970e. “R” = Assembly plant, Arlington, Texasf. “203756” = VIN number of vehicle that also matches VIN stamp on engine block, transmission, Protecto-Plate, Build Sheet, New Car Invoice and Window StickerSummary: VIN tag is the original, born-with item installed at the Arlington assembly plant. VIN tag appears to be unaltered, showing normal wear and aging for being 50 years, and is consistent with others we seen, inspected, photographed, etc. G. Cowl Tag1. Cowl Tag, located on horizontal LH rear surface, under hood, on top of the cowl, clearly visible, was photographedg. “70” = Year of manufactureh. “13637” = Malibu Two Door Hardtop, 8 cylinderi. “755” = Trim, Black Vinyl Bench Seat Interiorj. “01C” = Build Date, Body, Third Week of January 1970k. “75 B” = Paint and Top, Cranberry Red Exterior Paint with a Black Vinyl Topl. “BT” = Assembly Plant, Arlington Texasm. “03048” = Fisher Body Sequence Number Summary: Body tag is the original, born-with item installed at the Arlington assembly plant.· Body tag appears to be unaltered, is held in place with it original fasteners, and is consistent with others we seen, inspected, photographed, etc. · Codes on cowl tag match the way this vehicle is equipped. H. Brakes, Master Cylinder Assembly1. This is the original factory installed Delco Moraine component a. This item has been photographed. I. Alternator1. Has a 834 Delco Remy Number, should be #837a. This component is not the original item installed at the factoryb. This item has been photographed. J. Ignition Coil, #2931. This is the original factory installed Delco Remy component or an exact reproductiona. This item has been photographed. K. Intake Manifold, #39635361. This is the factory installed component installed on the engine at the Tonawanda Engine plant. a. This item has been photographed. II. II. ConditionA. Exterior. 1. Paint and Vinyl Topa. The exterior finish appears to have redone in last 10-15 years, is in good condition with very little orange peel, especially on the horizontal surfaces i. Our detail service recently color sanded all exterior surfaces and buffed, polished as needed to bring the vehicle to its full potential. ii. In the middle of the LR quarter panel, above the wheel opening, some filler cracking can be seen if you look hard enough for it. b. Panel fit is excellent and gaps between doors, deck lid, hood, etc as good or better than newc. The vinyl top appears to be fairly new, fits correctly and has the correct original grain and configuration. 2. Exterior trim, bumpers, grill, lights, lensa. All but the front and rear bumpers, appear to be excellent restored or original condition and are showing very little or no wearb. The front and rear bumpers are high quality reproduction items. 3. Doors, ease of closinga. Both doors open and close easilyb. Side glass fit to either other and body is excellent 4. Stainless exterior trim, windshield and side glass, wiper armsa. All trim appear to be in excellent restored or original condition and are showing very little or no wearb. Windshield is a reproduction with LOF etchings. The date code has not been checked. c. Door and rear window glass appear to be original to vehicle and are showing moderate scratches i. We did not take the time to check these item’s date codes and ascertain for sure if they are original to the vehicle 5. Tires, wheels, center caps and trim ringsa. Tires are the correct size reproduction Firestone Wide Ovals and showing little or no wear i. No cracking or weather-checking is visible ii. We did not check the manufacture date on tiresb. Wheels and center caps have not pulled and verified but we believe they are original to vehicle i. These items appear to be in good original condition ii. We will verify whether the four wheels on the ground before the vehicle is advertised. c. Trim rings on four wheels on ground are reproduction items. B. Undercarriage:1. General Conditiona. This vehicle has never received a frame-off or rotisserie restoration, just routine maintenance. i. No collision damage is visible, such as, a bent frame, damaged control arms, trailing arms, core support, etc. ii. All control arm bushings, rubber parts appear to be good condition and are showing little or no wear iii. Both front and rear coil springs have been replaced resulting the vehicle’s curb height being slightly higher than original. iv. Brakes, Steering, front and rear suspension all appear to be in good, driver condition· Calipers, rotors and drums appear to be original GM components, not generic replacements· All components are covered with rattle-can black paint v. All four shock absorbers are fairly new replacement, non-original gas items 2. Frame, control arms, and other suspension parts are not rust pitted and appear to have never been exposed to four-seasons type, weather, road salt, or high humiditya. Frame side rails have been slightly bent by the prior use of a floor jack3. Exhaust system, is showing some wear, and is a decent quality replacement system without resonatorsa. Correct GM replacement exhaust extensions or “cow bells” are present.b. No rust holes can be seen. 4. The differential assembly is un-restored, has been spray painted over moderate surface rusta. No damage can be seen to either the diff housing and its related componentsb. No leaks can be seen. 5. Floor pan, fuel tank and fuel lines, under-body are in good original or restored conditiona. Factory original body Schultz sound deadener is present in both rear wheel house areas, is in good condition and leads us to believe this vehicle has not sustained any or very little collision damageb. Fuel and brake lines are appear to be original or reproduction components in good conditionc. Fuel tank is a reproduction replacement item. d. Floor pan is original, undamaged and has had restoration black rattle-can overspray installed in an amateur fashion. i. No rust repair can be seen or suspectede. Factory pinch welds are present on the bottom of both quarters, between trunk, drop-down panels and the quarter panels themselves behind the rear wheel openings. f. No after-market tar, undercoating or filler materials are present that would be used cover up of rust or collision damage. C. Under-Hood:1. Overall condition is to a good restored level, but not to a national show level quality. a. All items are relatively clean and appear fully functionalb. Restoration is not to a national judging standard level. i. Items like hood hinges, latches, catches, etc. are painted rather than be plated in their correct original black-oxide, zinc or phosphate finishes. ii. Paint can be seen on fasteners that should plated finish 2. Engine assemblya. Clean and refinished in the correct orange finishb. Exhaust manifolds suffer from minor discoloring as a result of vehicle being stored for a short period of time in some humidity. i. Exhaust manifolds are believed to be original to vehicle but we have not verifiedc. Minor oil leaks are seen coming from the rear main seal and oil pan 3. All factory emission or smog parts including the pump, hoses, etc. are present including the TCS (Transmission Control System)a. Both systems appear to be working. b. The LH air tube for the smog system is not of the correct configuration. 4. Brake components, including lines, master cylinder and power brake boostera. Lines are good quality replacement or original items in good condition.b. PB Booster is either a original rebuilt or reproduction component in good working orderc. The master cylinder is the original Delco componentd. No leaks are present 5. Alternator, Battery and charging systema. The alternator is a non-original replacement part in good working order. Alternator output was recently checked and is good. b. The fasteners attaching the alternator and smog pump to the engine are not correctc. All wiring appears to be in good conditiond. Belt is a quanta reproduction parte. Battery is a brand new generic side terminal replacement with a Delco topper installed. 6. Wiper motor and related partsa. All are present, are in good working order and appear to be excellent restored or original components. 7. Horns and wiring harnessesa. Both original horns are present, working and in good conditionb. All wiring harnesses are either original or reproduction and in good condition8. Cowl Induction system a. All components are present, are in good working order and appear to be excellent restored or original components. 9. Radiator and cooling systema. All items appear to be in good-working order b. Hoses and clamps are reproduction partsc. No coolant leaks are present. d. The radiator is a fairly new generic replacement item. 10. Power steering systema. All components are present, are in good working order and appear to be in excellent restored or original condition b. PS Belt is a Quanta reproduction itemc. The steering box, PS pump and steering column appear to be original and in good working order. d. No leaks are presente. Hoses are generic replacements D. Interior:1. Dash, dash pad, electrical switches, gauges, heater controls, radioa. Dash assembly is an original component, not reproduction, and is in fair to good condition i. No cracks or holes cut in this assembly are visibleb. Tachometer is a reproduction itemc. The fuel gauge is not the correct item for a factory tach and gauge installation. d. The dash pad is original and is in good original conditione. Some gauges have been replaced by after-market itemsf. All lights work in dash except for the RH turn signal indicator. g. Radio is original AM-Eight Track unit and is showing some moderate aging and wear i. Per the original purchase agreement, the new car selling dealer installed this item. 2. Seats and Seat Belts, all components, frames, seat material, plastic seat backs, etc. a. Are a original or reproduction components in good to excellent conditionb. Pleats in front and rear seat material are present, and are of the correct original configuration. 3. Door panels and windshield interior moldingsa. Are original components in good to excellent condition 4. Carpet and Sill Platesa. Are quality reproduction items in good to excellent condition 5. Under-dash, wiring, heater box, etc. a. All components including the firewall pad, heater box, pedal assembly are original and in good un-restored conditionb. The under dash wiring harness appears to be butchered somewhat for the installation of aftermarket gauges. 6. Steering column assembly and steering wheela. Cancelling function works for turn signalb. Both items are in good restored condition. 7. Door Jam Areasa. We believe the painted surfaces in the door jamb areas are original finishes installed at the factory. b. Weather-striping and seals are original and in good to excellent condition. c. “Manufacturer by General Motors” ID Tag listing vehicles VIN and Assembly Date appears to be original, not reproduction item. 8. Head liner, sail panels, package tray and interior moldingsa. All items are either excellent original or high quality reproduction items. E. Trunk:1. Trunk floor, all metal surfaces seen inside trunka. Top side of trunk floor, inside surfaces of both quarter panels, wheel tubs and bottom surfaces of package tray appear to be original, not rust pitted or to have had any collision or rust repairsb. Quarter panel and trunk walls have their original spackle paint, and are original to vehicle. 2. Spare tire and bumper jack componentsa. All jack components are original and present and are in good un-restored conditionb. The spare tire and Uniroyal wheel are the original components. 3. Trunk mat, weather-strip, and painted finishes inside trunka. Trunk mat and weather-strip are quality reproduction partsb. Spackle finish is trunk and been redone on the horizontal surfaces, not the quarter walls III. Operations A. All lights work except the RH in-dash directional indicatorB. Engine starts easily and runs smoothly with lots of power. 1. A moderate oil leak is observed coming from the rear main sealC. Transmission shifts smoothly 1. Passing gear works2. Moderate leaks can be seen at the pan and tail shaft seal D. No differential whining noise can be heard. E. Steering is smooth, 1. Steering wheel appears to be centered when going forward2. Steering does not pull to one side or the otherF. Brakes work as they should1. No leaks have been observed2. Pedal is hard and vehicle stops straight, i.e., does not pull one way for the other. 180 digital photos document our findings and opinion.

BASIC CAR INFORMATION
Price:	95000 USD
Make:	Chevrolet
Model:	Chevelle
Year:	1970
Mileage:	60900 MI
Trim:	Black Vinyl Bench Seat, Column Shift
Engine:	LS6-454, 450 Horsepower
Transmission:	Automatic
Warranty:	None

CONTACT SELLER

Chevrolet Chevelle 1970

See also

1962 BMW Isetta

1939 Pontiac Business Coupe

1929 Ford Model A

1976 Chevrolet Camaro