Ford Bronco 1966

36000 USD

CAR DESCRIPTION FROM SELLER
Great Investment Opportunity! Here is your chance to own one of the few remaining unrestored early 1966 U13 Roadster Broncos! Body built by BUDD, not Ford. The same company that built the original Bronco prototype. This is from the pre-production/prototype tooling and not the final Ford tooling. These were only assembled in Aug, Sept and Oct of 1965 while Ford finalized their production line, then Ford took over by Nov 1965 and made the rest. This one has the original VIN stamp beginning with U13, not a copycat or converted U14 (truck) or U15 (wagon). A Budd Body makes it one of the first Broncos off the assembly line and highly collectible! There are believed to be less than 300 original U13 Roadsters remaining!Everything on this truck Works including the original vacuum operated windshield wipers, the wiper washer pump, the in cab heater controls, and all lights and gauges except the fuel gauge. Door inserts, windshield frame, interior tub, and hood have had paint work but other panels appear original. Because this truck has NOT been restored, there are blemishes in the paint as indicated in the pics. Minor scrapes/scuffs from times gone by. Floorboards are solid and only have paint chipping. There are 3 very minor rust spots on the truck. Two of them are on the driver lower rocker panel at the very bottom. One is under the passenger front seat at the welded seam. All three could be easily repaired with tack-welds and touch-up paint to keep this as original as possible. Frame is 100% solid with zero rust. All other body panes are 100% rust free.Engine is the original 170 CI inline 6 with a 3 on the tree transmission. The engine was rebuilt in 1999 and has around 1,000 miles put on it since then. Brake master cylinder and wheel cylinders have been rebuilt along with new front axle seals - all around 2010.This is an ultra rare collectible Bronco that needs to go to someone who will appreciate it for its originality.Bronco has a Black aftermarket Bestop soft top amd the ORIGINAL White Vinyl wire-frame doors. The top and doors are in usable condition but I would not trust them to protect the interior for open cross-country shipping. Enclosed shipping or direct pick-up should be considered.Full enclosed shipping is recommended!* Please note, this vehicle is registered and insured in Alabama. Alabama will NOT issue a title on any motor vehicle over 30 years of age regardless of circumstance or request. This vehicle will be sold on a BILL OF SALE and copy of Current AL Tag Registration showing proof of ownership - again, NO TITLE is available from Alabama under any circumstances and this is accepted in all 50 states.

CAR DESCRIPTION FROM SELLER

Great Investment Opportunity! Here is your chance to own one of the few remaining unrestored early 1966 U13 Roadster Broncos! Body built by BUDD, not Ford. The same company that built the original Bronco prototype. This is from the pre-production/prototype tooling and not the final Ford tooling. These were only assembled in Aug, Sept and Oct of 1965 while Ford finalized their production line, then Ford took over by Nov 1965 and made the rest. This one has the original VIN stamp beginning with U13, not a copycat or converted U14 (truck) or U15 (wagon). A Budd Body makes it one of the first Broncos off the assembly line and highly collectible! There are believed to be less than 300 original U13 Roadsters remaining!Everything on this truck Works including the original vacuum operated windshield wipers, the wiper washer pump, the in cab heater controls, and all lights and gauges except the fuel gauge. Door inserts, windshield frame, interior tub, and hood have had paint work but other panels appear original. Because this truck has NOT been restored, there are blemishes in the paint as indicated in the pics. Minor scrapes/scuffs from times gone by. Floorboards are solid and only have paint chipping. There are 3 very minor rust spots on the truck. Two of them are on the driver lower rocker panel at the very bottom. One is under the passenger front seat at the welded seam. All three could be easily repaired with tack-welds and touch-up paint to keep this as original as possible. Frame is 100% solid with zero rust. All other body panes are 100% rust free.Engine is the original 170 CI inline 6 with a 3 on the tree transmission. The engine was rebuilt in 1999 and has around 1,000 miles put on it since then. Brake master cylinder and wheel cylinders have been rebuilt along with new front axle seals - all around 2010.This is an ultra rare collectible Bronco that needs to go to someone who will appreciate it for its originality.Bronco has a Black aftermarket Bestop soft top amd the ORIGINAL White Vinyl wire-frame doors. The top and doors are in usable condition but I would not trust them to protect the interior for open cross-country shipping. Enclosed shipping or direct pick-up should be considered.Full enclosed shipping is recommended!* Please note, this vehicle is registered and insured in Alabama. Alabama will NOT issue a title on any motor vehicle over 30 years of age regardless of circumstance or request. This vehicle will be sold on a BILL OF SALE and copy of Current AL Tag Registration showing proof of ownership - again, NO TITLE is available from Alabama under any circumstances and this is accepted in all 50 states.

BASIC CAR INFORMATION
Price:	36000 USD
Make:	Ford
Model:	Bronco
Year:	1966
Mileage:	76856 MI
Trim:	U13 Roadster
Engine:	Inline 6 170CI
Transmission:	Manual
Warranty:	Vehicle does NOT have an existing warranty

CONTACT SELLER

Ford Bronco 1966

See also

1956 Chrysler Imperial South Hampton 2 Dr Hardtop

1962 Studebaker Hawk

1976 Pontiac Trans Am

1973 Ferrari Dino 246GT